Special Commands; Pause Duration; Begin New Rule; Save Rule - Symbol LS4278 Product Reference Manual

Hide thumbs Also See for LS4278:

Table of Contents

Advanced Data Formatting 14-7

Special Commands

This parameter along with the Send Pause parameter on

allows a pause to be inserted in the data transmission. Pauses

are set by scanning a two-digit number (i.e., two bar codes), and are measured in 0.1 second intervals. For example, scanning bar

codes "0" and "1" inserts a 0.1 second pause; "0" and "5" gives a 0.5 second delay. Numeric bar codes begin on

Appendix D, Numeric Bar

Codes. In case of an error, or to change the selection, scan

Cancel on page

Scan this bar code to start entering a new rule

Scan this bar code to save the entered rule.