Code 39 Full Ascii Conversion; Code 39 Buffering (Scan & Store) - Symbol LS4278 Product Reference Manual

Code 39 Full ASCII Conversion

Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable or disable Code 39
Full ASCII, scan the appropriate bar code below.
Enable Code 39 Full ASCII
Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously.
Code 39 Full ASCII to Full ASCII Correlation is host-dependent and is described in the ASCII Character Set
table for the appropriate interface. See
Set for RS-232 on page 7-19
Code 39 Buffering (Scan & Store)
This feature allows the scanner to accumulate data from multiple Code 39 symbols.
Selecting the Scan and Store option (Buffer Code 39) temporarily buffers all Code 39 symbols having a leading space as a first
character for later transmission. The leading space is not buffered.
Decode of a valid Code 39 symbol with no leading space causes transmission in sequence of all buffered data in a first-in first-out
format, plus transmission of the "triggering" symbol. See the following pages for further details.
When the Do Not Buffer Code 39 option is selected, all decoded Code 39 symbols are transmitted immediately without being
stored in the buffer.
Keyboard Wedge ASCII Character Set on page
and ASCII Character Set for USB on page 8-14
*
Disable Code 39 Full ASCII
6-14, ASCII Character
for the appropriate interface.
Symbologies 13-25