Flash; Temporary Tone Dialing - VTech CD1281 User Manual

Telephone operation

Flash

If you subscribe to call waiting service with your
telephone service provider, you will hear a beep
when there is an incoming call while on a call on the
same line.
Press FLASH to put your current call on hold and
1.
answer the new call.
Press FLASH anytime to switch back and forth
2.
between calls. For more information on caller ID
with call waiting, see page 36.

Temporary tone dialing

If you have dial pulse (rotary) dialing service only, you can temporarily switch
from dial pulse to touch-tone dialing during a call.
1. During a call, press
this send touch-tone signals.
2. Use the dial pad keys to enter the relevant
number. The telephone sends touch-tone signals.
3. The telephone automatically returns to pulse
dialing mode after you hang up.
. Buttons pressed after
27 27
DIR
CID
DIR
CID