Phone Led; Battlow Led; Onloff Key; Flash Key - VTech VT 1980 Instruction Manual

PHONE LED
The PHONE LED lights when
the phone line is being used by
the handset.
I t
f l a s h e s d u r i n g t h e
programming mode.
It flashes quickly when the line
is on hold.
BATTLOW LED
The BATT LOW LED will flash
quickly when the handset
battery is getting low and needs
to be recharged.
It flashes slowly when the
handset is out of the talking
range or the base station is not
powered up.
The BATT LOW LED glows
s t e a d i l y when MUTE i s
activated.
OWOFF KEY
Press the ON/OFF key
to
make
a call or end a call.
FLASH KEY
Press FLASH t o switch
between calls when Call Waiting
signal is heard.
When in OFF mode, pressing
FLASH and a number key
(1,2,3,4) selects the ringer type.
MEM KEY
Used to store telephone
numbers i n memory and
perform speed number dialing.
dial the last number that was
called on your phone.
It can also be used for a brief
PAUSE when programming
speed numbers.
HOLD KEY
When using your phone, press
HOLD to put a call on hold.
To return to the call , press
PHONE or HOLD.
EMGCY KEY (EMERGENCY
CALL)
One-touch speed dial number
which can be programmed for
an emergency
#
or
any other
frequently dialed number.
MUTE KEY
When using your phone, press
MUTE to temporarily turn
off
the microphone.
To reactivate the microphone
press MUTE again.
UP KEY
Used to increase the earpiece
volume during a call.
Used to increase the ringer
volume during OFF mode.
DOWN KEY
Used to decrease the earpiece
volume during a call.
Used to decrease the ringer
volume during OFF mode.
*
/ TONE KEY
In PULSE dialing mode, it is
used to switch to Temporary
Tone dialing
mode.
"
t
REDIAL KEY
When you hear the dial tone,
pressing the REDIAL key will
12