Sanyo Zio User Manual page 83

2.
From the Bluetooth settings page, touch
device must be visible to successfully pair with an external
device.
3.
Touch . Your device will display a list of
Scan for devices
discovered in-range Bluetooth devices.
4.
Touch a device you would like to pair with, enter a passkey, if
necessary, and touch .
OK
Note:
Some devices may be paired by touching
option is available.
5.
The device will be paired when it enters the same passkey.
Note:
For car kits, enter "0000" or "1234." If it does not work,
consult the Bluetooth devices documentation.
Due to different specifications and features of other
Bluetooth-compatible devices, display and operations may be
different, and functions such as transfer or exchange may not
be possible with all Bluetooth-compatible devices.
Pairing between two Bluetooth devices is a one-time process.
Once a pairing has been created, the devices will continue to
recognize their partnership and exchange information without
having to re-enter a passkey again.
. Your To disconnect Bluetooth devices:
Discoverable
1.
2.
3.
To unpair Bluetooth devices:
Pair
when the
1.
2.
3.
Touch > > Settings
.
Bluetooth settings
Under the Bluetooth devices section, touch and hold the
connected device.
On the options menu, touch Disconnect
Touch > > Settings
.
Bluetooth settings
Under the Bluetooth devices section, touch and hold the
paired device.
On the options menu, touch Unpair
(when connected).
> Wireless & networks >
.
> Wireless & networks >
or Disconnect & unpair
2I. Bluetooth 73