Unlocking The Screen - Sanyo Zio User Manual

During an emergency call, the following options are available on
the screen or by touching
Touch to activate speakerphone mode.
Touch to display your Contacts list.
Contacts
Touch Bluetooth to transfer the call to a connected Bluetooth
device.
Touch to finish the emergency call.
End call
Tip:
Your phone number will be displayed on the screen during an
emergency call.
To exit Emergency mode:
1.
Press to end a 911 call.
2.
Touch and then press
touching .
Enhanced 911 (E911) Information
This device features an embedded Global Positioning System
(GPS) chip necessary for utilizing E911 emergency location
services where available.
When you place an emergency 911 call, the GPS feature of your
device seeks information to calculate your approximate location.
Depending on several variables, including availability and access
:
within five seconds after
to satellite signals, it may take up to 30 seconds or more to
determine and report your approximate location.
Important:
Always report your location to the 911 operator
when placing an emergency call.
emergency call takers, known as Public Safety
Answering Points (PSAPs) may not be equipped to
receive GPS location information from your device.
In-Call Options

Unlocking the Screen

The device screen is locked automatically during a call to avoid
accidentally touching the screen.
To unlock the screen:
Drag the Unlock icon (
The screen and the device offer the following options during a
call:
Touch to route the device's audio through the speaker.
WARNING:
Because of higher volume levels, do not place the
device near your ear during speakerphone use.
Touch to disable the microphone.
Some designated
) to the status bar.
2A. Device Basics 23