Alarm Clock - Sanyo Zio User Manual

Alarm Clock

Your device comes with a built-in alarm clock that has multiple
alarm capabilities.
Setting an Alarm
1. Touch >
Note:
When you first open the alarm clock, three alarms are set up
by default and ready for you to customize. These alarms are
turned off by default.
2. Touch an alarm to select it.
Note:
A new alarm can also be created by touching
Add alarm .
3.
Touch the Time field to adjust the hour and minute by
tapping or .
+ -
Touch the or
AM PM
24 hour setting is not on.
Touch when finished.
Set
4. Touch to select a ringtone that will play as an
Ringtone
alarm.
Touch a ringtone to hear a sample.
56 2E. Calendar & Tools
> .
Alarm Clock
button to change the value if the 
Touch
5.
Touch
Vibrate
6. Touch the
alarm.
Select the days you want the alarm to be active and 
touch
7. Enter a unique name for this alarm by touching the
field, entering a new label, and touching
8.
Touch
Done
indicates the alarm is set for the event.
Note:
The number of hours and minutes left before the alarm goes
> 
off is briefly displayed onscreen after you set the new alarm
time.
To delete an Alarm:
1.
Touch
2.
Select an alarm.
3.
Touch
To customize the onscreen clock:
1. Touch
2. Touch the onscreen alarm clock.
to accept the ringtone assignment.
OK
to add a vibration feature to the alarm.
field to select a repeat status for the
Repeat
.
OK
to return to the
Alarm clock
> >
Alarm Clock
> .
Delete alarm
> >
Alarm Clock
Label
.
OK
. A check mark
.
.