Turning Your Device On And Off; Battery And Charger - Sanyo Zio User Manual

Application Icons
Voice Dialer – Launches the built-in voice dialer, which
allows you to make calls, open an application, etc. using
voice commands.
Voice Search – Allows you to launch a Google search
using voice commands.
YouTube – Provides access to the YouTube website.

Turning Your Device On and Off

Turning Your Device On
Press and hold .
Once your device is on and finds a signal, it automatically enters
standby mode – the device's idle state. At this point, you are
ready to begin making and receiving calls.
If your device is unable to find a signal after five minutes of
searching, a Power Save feature is activated and your device
searches for a signal periodically without your intervention. When
a signal is found, your device automatically returns to standby
mode.
Tip:
The Power Save feature conserves your battery power when
you are in an area where there is no signal.
Turning Your Device Off
1.
Press and hold for two seconds. The
window appears.
2.
Touch > to turn the device off.
Power off OK

Battery and Charger

WARNING:
Use only Kyocera-approved batteries and chargers
with your device. The failure to use a Kyocera-
approved battery and charger may increase the risk
that your device will overheat, catch fire, or explode,
resulting in serious bodily injury, death, or property
damage.
Battery Capacity
Your device is equipped with a Lithium Ion (Li-Ion) battery. It
allows you to recharge your battery before it is fully drained. The
battery provides up to 4.6 hours of continuous digital talk time.
Phone options
2A. Device Basics 11