Direct Paging - Handsfree Answerback Disabled - Mitel 5312 User Manual

Mitel 5312/5324 IP Phones User Guide
To turn Handsfree Answerback off:

Press the flashing

To respond to a Direct Page when Handsfree Answerback is OFF, see "Direct Page –
Handsfree Answerback Disabled" elsewhere in this guide.
Note: By default, Handsfree Answerback is turned OFF at your phone. If the
key is OFF when your set is idle, Handsfree Answerback is OFF.
To answer a call using Handsfree Answerback:
Phone state before Page arrives
Phone is idle and MUTE is flashing
You are on a handset or headset call, and
MUTE is OFF
You are on a MUTED handset/headset call,
OR, you are on a Handsfree call
To end a Handsfree Answerback call:

Press either
Note: When the Handsfree Direct Page call ends, the MUTE key light returns to the
state it was in before the call was established.

Direct Paging - Handsfree Answerback Disabled

Your administrator enables or disables Handsfree Answerback and you can also turn it on or
off on your phone.
To turn Handsfree Answerback off, see Direct Paging - Handsfree Answerback Enabled in
this guide. When Handsfree Answerback is disabled on your phone and you receive a Direct
Page, the Direct Page is indicated by a single burst of tone.
(MUTE) key once. The MUTE key light turns OFF.
1. Check that MUTE is OFF.
2. Listen for the paging party.
3. Begin speaking.
4. Lift the handset if you wish to switch from a
1. Check that MUTE is flashing.
2. Press MUTE. The light turns ON solid, and you are
3. Speak to the paging party. Press MUTE to alternate
The party paging you receives a busy tone. Handsfree
Answerback does not interrupt your call.
(SPEAKER) or (CANCEL).
- 28 -
To answer the Direct Page
Handsfree call to a handset call.
now speaking to the paging party and have muted
your handset/headset call.
between handset/headset and handsfree calls.
(MUTE)