Table of Contents
Advertisement
3.1.7 Removing the Micom board (See Fig.14)
(1) Remove the two screws M attaching the Micom board.
3.1.8 Removing the Front jack board (See Fig.15)
(1) Remove the three screws N attaching the Front jack board.
3.1.9 Removing the Power board (See Fig.16)
(1) Disconnect the connector wires from Power transformer
connected to connectors CN800,
Power board.
(2) Remove the two screws P attaching the power board.
3.1.10 Removing the FL board (See Fig.17)
(1) Disengage four hooks c engaged FL board.
CN804
and
CN805
of the
Fig.14
Fig.15
CN805
CN804
CN800
Fig.16
c
hook
c
hook
Fig.17
M
N
P
(No.MB682<Rev.001>)1-11
Hide quick links:
Advertisement
Table of Contents
