Table of Contents
Advertisement
3.1.4 Removing the Amp board (See Fig.8 to 10)
(1) Disconnect the Connector wire from Front jack board con-
nected to connector
CN201
(2) Disconnect the card wire from Micom board connected to
connector
CN204
of the Amp board. (See Fig.8)
(3) Disconnect the flat wires connected to connectors
and
CN208
of the Amp board. (See Fig.8)
(4) Disconnect the card wire from Micom board connected to
connector
CN205
of the Amp board. (See Fig.8)
(5) Disconnect the card wire from DVD mechanism connected
to connector
CN213
of the Amp board. (See Fig.8)
(6) Disconnect the flat wire from Front jack board connected to
connector
CN203
of the Amp board. (See Fig.8)
(7) Disconnect the connector wire from Power transformer
connected to connector
Fig.8)
(8) Disconnect the flat wire s from Power board connected to
connectors CN210,
CN211
(See Fig.8)
(9) Disconnect the connector wire from FAN connected to con-
nector
CN206
of the Amp board. (See Fig.8)
(10) Remove the two screws G attaching the Amp board. (See
Fig.8)
(11) Remove the two screws H attaching the Heat sink bracket.
(See Fig.9)
(12) Remove the one screw J attaching the Amp board. (See
Fig.9)
(13) Remove the two screws K attaching the Speaker terminal.
(See Fig.10)
CN204
CN201
G
CN208
CN207
CN205
of the Amp board. (See Fig.8)
CN207
CN209
of the Amp board. (See
and
CN212
of the Amp board.
CN203
CN213
G
CN209
CN212
CN211
CN210
CN206
Fig.8
H
J
Fig.9
K
Fig.10
(No.MB682<Rev.001>)1-9
Hide quick links:
Advertisement
Table of Contents
