4.1
ATTENTION IN SERVICE OF DVD SECTION
(1) When pickup, Flash ROM ,DVD module board were changed, initialize EEPROM by all means.
(2) When full initialization was excuted, excute learning with a DVD test disc by all means.
Test disc : VT-501, VT-502
Learning method : It is adjusted automatically by normal playback of a DVD disc.
4.2
DVD/CD TEST MODE
CAUTION:
The operation please use the button of the main body.
(1) Press "DVD/CD" key + "STOP" key on panel, then AC in.
(2) FL display "T **# $&"
** is Destination
# is Region Code
$ is Learning Condition
& is Initialize Condition
(3) Press "MENU/PL" key repeatedly, until FL display "CHECK"
(4) Press number key on Remote Control "1-10, 0 and >=10"
Key 1 : "PLAYBACK"
Key 2 : "WOBBLE"
Key 3 : "TNO-1 SR"
Key 4 : "CDLD LSR"
Key 5 : "DVDLDLSR"
Key 6 : " JITX1 "
Key 7 : "EEP BWD"
Key 8 : "EEP FWD"
Key 9 : " TEMP "
Key 10 : " DVD-DL "
Key 0 : " MONITOR "
Key >=10 : " INIT "
1-18 (No.MB682<Rev.001>)
SECTION 4
ADJUSTMENT