MICRO COMPONENT SYSTEM UX-GD6S —Consists of CA-UXGD6S and SP-UXGD6S UX-GD6M —Consists of CA-UXGD6M and SP-UXGD6M UX-GD6S UX-GD6M SUPER VIDEO INSTRUCTIONS GVT0149-002A [UW, US, UN, UG, UX]...
Warnings, Cautions and Others CAUTION— Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The button in any position does not disconnect the mains line. • When the unit is on standby, the STANDBY/ON lamp lights in red.
Recording on a Tape ... 28 Synchronized Disc Recording... 29 Enjoying Karaoke...30 Singing Along (Karaoke) ... 30 Microphone Mixing ... 31 Timer Operations...32 Setup Menu Operations ...34 Additional Information ...36 Operating JVC’s TVs Using the Remote Control... 42 Specifications ... 43 Parts Index ...44...
Playable Disc Types INFO DIGITAL VIDEO SUPER VIDEO • CD-R/RW: Recorded in the Audio CD, Video CD, SVCD, MP3, and JPEG formats. • DVD-R: Recorded in the DVD Video format. • DVD-RW/RAM: Recorded in the DVD Video Recording (VR) format. In addition to the above discs, this system can play back audio data recorded on CD Text, CD-G (CD Graphics), and CD-Extra.
Do not connect the AC power cord until all other connections have been made. • Connect VIDEO OUT/COMPONENT directly to the video input of your TV. Connecting VIDEO OUT/COMPONENT to a TV via a VCR may interfere with your viewing when playing back a copy-protected disc.
Page 6
AM/FM antenna To assemble the AM loop antenna To connect AM/FM antenna AM loop antenna (supplied) N N A A N T E E X T L O O P FM antenna (supplied) (7 5 I A L C O A X Extend it so that you can obtain the best reception.
Digital audio component E A M Protective cap / S T R P C M C A L O P T I D V D A L O D I G I T • Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly according to the connected digital audio equipment (see page 35).
The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 FM reception indicators • MONO: lights while receiving an FM stereo station in monaural.
Daily Operations 10 keys ENTER TOP MENU/PG 1/¡ SHIFT DVD/CD VOLUME TV VOLUME —Playback In this manual, the operation using the remote control is mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks.
Listening to the Radio INFO To set the AM tuner interval spacing Before operating the tuner, it is required to select the appropriate AM space interval used for your area. Select the AM band. FM/AM Turn off the power. Select the appropriate AM space interval for your area.
Activate the preset number entry mode. CANCEL • Finish the following process while the indication on the display is flashing. Select a preset number for the station you store. Examples: DIMMER SLEEP A.STANDBY To select preset number 5, press SCAN MODE To select preset number 15, press 3D PHONIC DVD LEVEL...
Page 12
Playing Back a Disc INFO Before operating a disc, be familiar how a disc is recorded. • DVD Video comprises of “Titles” which includes “Chapters,” DVD Audio/MP3/JPEG comprise of “Groups” which includes “Tracks,” and CD/SVCD/VCD comprise of only “Tracks.” • For MP3/JPEG playback, see also page 25. To insert a disc You can insert a disc while playing another source.
Page 13
Remote To locate an item directly ONLY You can select a title/chapter/track directly and start playback. • For DVD Video, you can select a title before starting playback, while you can select a chapter after starting playback. Examples: DIMMER SLEEP A.STANDBY To select number 5, press 5.
Daily Operations Remote control SCAN MODE DIMMER 3D PHONIC ENTER AHB PRO BASS/TREBLE SHIFT CLOCK/ TIMER Main unit —Sound & Other Adjustments Adjusting the Volume You can adjust the volume level from level 0 (VOL MIN) to level 40 (VOL MAX). Remote control: SLEEP A.STANDBY...
To adjust the tone You can adjust the bass and treble level from –3 to +3. To adjust the bass BASS/ BASS TREBLE Canceled To adjust the treble BASS/ BASS TREBLE Canceled Creating 3-dimentional Sound Field Remote —3D Phonic ONLY While playing a disc...
Changing the Display Brightness You can dim the display window. DIMMER DIM1 DIM OFF (Canceled) (at the same time) DIM1 Dims the display. DIM2 Erases the display illumination. AUTO DIM Erases the display illumination when disc playback starts.* • The display illuminates when playback stops.
Remote Setting the Clock ONLY Without setting the built-in clock, you cannot use Timers (see page 32) and Sleep Timer. • To correct a misentry during the process, press CANCEL (while holding SHIFT) or CLOCK/TIMER. You can return to the previous step. Activate the clock setting mode.
Unique DVD/VCD Operations Remote control 10 keys PAGE DVD/CD 3 SLOW / AUDIO ZOOM SHIFT Selecting the Audio Track For DVD Video: While playing back a chapter containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to.
Selecting the Subtitle Language For DVD Video: While playing back a chapter containing subtitles in different languages, you can select the subtitle language to display on the TV. For SVCD: While playing, you can select the subtitles even if no subtitles are recorded on the disc. •...
Enter the key number. DIMMER SLEEP A.STANDBY SCAN MODE 3D PHONIC DVD LEVEL Follow the interactive instructions shown on the screen. To cancel the key number entry, press 7. Making Dialogues Clear—Clear Voice When you play back a disc, you can use this function—Clear Voice.
Advanced Disc Operations Remote control 10 keys DVD/CD 3 SHIFT Main unit DVD/CD # 4, 7, ¢ Programming the Playing Order— Program Play You can arrange the playing order of the chapters or tracks (up to 99) before you start playback. •...
Start playback. Playback starts in the order you DVD/CD have programmed. To skip a step: To pause: GROUP/TITLE SKIP To release, press DVD/CD 3. To check the programmed contents Before or after playback... TV CH In the reverse order. TV CH In the programmed order.
Playing Repeatedly Remote ONLY • You can also select the repeat mode using the on-screen bar (see pages 23 and 24). • For JPEG/DVD-VR discs, see page 27. Repeat Play You can repeat playback. • For DVD Video: While playing... REPEAT A-B REPEAT REP CHAP...
On-Screen Disc Operations Remote control TOP MENU/PG DVD/CD 3 ¡ ZOOM On-screen bars DVD Video Dolby D TITLE 2 CHAP CHAP 3 TITLE DVD-VIDEO 3/2.1ch TIME TIME CHAP. DVD Audio LPCM GROUP 14 TRACK 23 DVD-AUDIO 2/0.0ch TIME 1/ 3 PAGE TRACK SVCD...
Operations Using the On-screen Bar Ex.: Selecting a subtitle (French) for DVD Video While a disc is selected as the source... Display the entire on-screen bar. ON SCREEN Dolby D TITLE 2 DVD-VIDEO 3/2.1ch Dolby D TITLE TITLE 2 DVD-VIDEO 3/2.1ch TIME CHAP.
4 Select the repeat mode you want. Repeats a desired portion (see below). TITLE* Repeats the current title. GROUP Repeats the current group. Repeats the disc (except for DVD) or program. CHAPTER** Repeats the current chapter. TRACK** Repeats the current track. Cancels Repeat Play.
Page 27
4 Enter the desired chapter/track number. Examples: DIMMER SLEEP A.STANDBY To select chapter/track 5, press SCAN MODE To select chapter/track 15, 3D PHONIC DVD LEVEL press 1, then 5. To select chapter/track 30, press 3, then 0. • To correct a misentry, press the 10 keys until the desired number shown in the pop-up window.
Page 28
Control screen for DVD-RW/RAM in DVD-VR format The control screen is superimposed on the TV screen when you call up Program List (PG) or Play List (PL). To select playback type To select the Program To select the Play List: List: MENU/PL TOP MENU/PG...
Page 29
To select a group (for MP3/JPEG): GROUP/TITLE SKIP (at the same time) To skip a track: To stop playback: GROUP/TITLE SKIP To repeat slide-show for JPEG While playing or before playback... REPEAT A-B REPEAT REP GRP REP OFF (Canceled) REP GRP Repeats the current group. REP ALL Repeats the disc.
Advanced Tape Operations Remote control TAPE 2 3 DVD/CD 3 SHIFT Main unit PUSH OPEN 0 DVD/CD # TAPE @ # IMPORTANT It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. Recording on a Tape You can use type I tapes for recording.
Select and start playing the source—“FM,” “AM,” “DVD/CD,” or “AUX.” • When recording a disc, you can also use “Synchronized Disc Recording” (see below). Start recording. On the main unit To stop recording: Synchronized Disc Recording You can start and stop both disc play and tape recording at the same time.
Remote control KARAOKE TAPE 2 3 DVD/CD 3 AUDIO SHIFT Main unit MIC jack MIC VOLUME DVD/CD # TAPE @ # Enjoying Karaoke IMPORTANT Always set MIC VOLUME to MIN when connecting or disconnecting the microphone. DO NOT keep the microphone connected while they are not in use.
To adjust the Key (disc playback only) Activate Key Control. TOP MENU/PG KEYCON KARAOKE (at the same time) Adjust the Key (at the same time) • Key Control cannot be activated for DVD Audio/DVD- To deactivate Key Control, press KARAOKE (while holding SHIFT) to select “OFF.”...
Remote control CANCEL * Daily Timer initial settings when shipped from the factory • DAILY 1:ON Time (6:00)/OFF Time (8:00)/ Source (TUNER FM 1)/Volume level (– –) • DAILY 2:ON Time (12:00)/OFF Time (14:00)/ Source (TUNER FM 1)/Volume level (– –) •...
Page 35
5 Select the volume level. • You can select the volume level (“1” to “40” and “VOL – –”). If you select “VOL – –,” the volume is set to the last level when the unit has been turned off. Once settings are complete, the Timer setting information appears in sequence.
Setup Menu Operations Remote Control SET UP LANGUAGE menu Item MENU LANGUAGE You can select the initial menu language of DVD Video. AUDIO LANGUAGE You can select the initial audio language of DVD Video. SUBTITLE You can select the initial subtitle language of DVD Video. ON SCREEN LANGUAGE You can select “ENGLISH,”...
AUDIO menu Item DIGITAL AUDIO OUTPUT Set this item correctly when using the DVD OPTICAL DIGITAL OUT terminal on the rear. PCM ONLY: When connecting to audio equipment which can decode only linear PCM signals. DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a built- in Dolby Digital decoder.
Additional Information Learning More about This System Introduction (see pages 1 to 2) Playable Disc Types: • If you play back an NTSC disc with this setting set to “PAL,” you can watch the playback pictures (the disc will be reproduced using “PAL 60”...
Daily Operations—Sound & Other Adjustments (see pages 12 to 15) Adjusting the Sound: • This function also affects the sound through the headphones. Presetting Automatic DVD Video Sound Increase Level: • This also functions for DVD-VR formatted discs. Changing the Scanning Mode: •...
Page 40
Advanced Tape Operations (see pages 28 to 29) Recording on a Tape: • The recording level is automatically set correctly. Thus, you can adjust the sound you are actually listening to without affecting the recording level. • There is leader tape which cannot be recorded onto at the start and end of cassette tapes.
Page 41
Maintenance To get the best performance of the System, keep your discs, tapes, and mechanism clean. Handling discs • Remove the disc from its case by holding it at the edge while pressing the center hole lightly. • Do not touch the shiny surface of the disc, or bend the disc. •...
Troubleshooting General: Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat procedure again. Operations are disabled. ] The built-in microprocessor may malfunction due to external electrical interference. Unplug the AC power cord and then plug it back in. Unable to operate the System from the remote control.
Language Code List Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish Bhutani Greek Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi...
Dolby Digital bitstream 44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM DTS bitstream 32/44.1/48 kHz, 16 bit Linear PCM You can use the remote control to operate JVC’s TVs. While holding SHIFT, press... TV CH TV/VIDEO TV VOLUME...
Page 48
MICRO COMPONENT SYSTEM UX-GD6S —Consists of CA-UXGD6S and SP-UXGD6S UX-GD6M —Consists of CA-UXGD6M and SP-UXGD6M UX-GD6S UX-GD6M SUPER VIDEO INSTRUCTIONS GVT0149-014A [A, UB]...
Page 49
Warnings, Cautions and Others CAUTION— Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The button in any position does not disconnect the mains line. • When the unit is on standby, the STANDBY/ON lamp lights in red.
Recording on a Tape ... 28 Synchronized Disc Recording... 29 Enjoying Karaoke...30 Singing Along (Karaoke) ... 30 Microphone Mixing ... 31 Timer Operations...32 Setup Menu Operations ...34 Additional Information ...36 Operating JVC’s TVs Using the Remote Control... 42 Specifications ... 43 Parts Index ...44...
Page 51
Playable Disc Types INFO DIGITAL VIDEO SUPER VIDEO • CD-R/RW: Recorded in the Audio CD, Video CD, SVCD, MP3, and JPEG formats. • DVD-R: Recorded in the DVD Video format. • DVD-RW/RAM: Recorded in the DVD Video Recording (VR) format. In addition to the above discs, this system can play back audio data recorded on CD Text, CD-G (CD Graphics), and CD-Extra.
Do not connect the AC power cord until all other connections have been made. • Connect VIDEO OUT/COMPONENT directly to the video input of your TV. Connecting VIDEO OUT/COMPONENT to a TV via a VCR may interfere with your viewing when playing back a copy-protected disc.
Page 53
AM/FM antenna To assemble the AM loop antenna To connect AM/FM antenna AM loop antenna (supplied) N N A A N T E E X T L O O P FM antenna (supplied) (7 5 I A L C O A X Extend it so that you can obtain the best reception.
Page 54
Digital audio component E A M Protective cap / S T R P C M C A L O P T I D V D A L O D I G I T • Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly according to the connected digital audio equipment (see page 35).
The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 FM reception indicators • MONO: lights while receiving an FM stereo station in monaural.
Daily Operations 10 keys ENTER TOP MENU/PG 1/¡ SHIFT DVD/CD VOLUME TV VOLUME —Playback In this manual, the operation using the remote control is mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks.
Page 57
Listening to the Radio INFO To set the AM tuner interval spacing Before operating the tuner, it is required to select the appropriate AM space interval used for your area. Select the AM band. FM/AM Turn off the power. Select the appropriate AM space interval for your area.
Page 58
Activate the preset number entry mode. CANCEL • Finish the following process while the indication on the display is flashing. Select a preset number for the station you store. Examples: DIMMER SLEEP A.STANDBY To select preset number 5, press SCAN MODE To select preset number 15, press 3D PHONIC DVD LEVEL...
Page 59
Playing Back a Disc INFO Before operating a disc, be familiar how a disc is recorded. • DVD Video comprises of “Titles” which includes “Chapters,” DVD Audio/MP3/JPEG comprise of “Groups” which includes “Tracks,” and CD/SVCD/VCD comprise of only “Tracks.” • For MP3/JPEG playback, see also page 25. To insert a disc You can insert a disc while playing another source.
Page 60
Remote To locate an item directly ONLY You can select a title/chapter/track directly and start playback. • For DVD Video, you can select a title before starting playback, while you can select a chapter after starting playback. Examples: DIMMER SLEEP A.STANDBY To select number 5, press 5.
Daily Operations Remote control SCAN MODE DIMMER 3D PHONIC ENTER AHB PRO BASS/TREBLE SHIFT CLOCK/ TIMER Main unit —Sound & Other Adjustments Adjusting the Volume You can adjust the volume level from level 0 (VOL MIN) to level 40 (VOL MAX). Remote control: SLEEP A.STANDBY...
To adjust the tone You can adjust the bass and treble level from –3 to +3. To adjust the bass BASS/ BASS TREBLE Canceled To adjust the treble BASS/ BASS TREBLE Canceled Creating 3-dimentional Sound Field Remote —3D Phonic ONLY While playing a disc...
Changing the Display Brightness You can dim the display window. DIMMER DIM1 DIM OFF (Canceled) (at the same time) DIM1 Dims the display. DIM2 Erases the display illumination. AUTO DIM Erases the display illumination when disc playback starts.* • The display illuminates when playback stops.
Remote Setting the Clock ONLY Without setting the built-in clock, you cannot use Timers (see page 32) and Sleep Timer. • To correct a misentry during the process, press CANCEL (while holding SHIFT) or CLOCK/TIMER. You can return to the previous step. Activate the clock setting mode.
Unique DVD/VCD Operations Remote control 10 keys PAGE DVD/CD 3 SLOW / AUDIO ZOOM SHIFT Selecting the Audio Track For DVD Video: While playing back a chapter containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to.
Selecting the Subtitle Language For DVD Video: While playing back a chapter containing subtitles in different languages, you can select the subtitle language to display on the TV. For SVCD: While playing, you can select the subtitles even if no subtitles are recorded on the disc. •...
Enter the key number. DIMMER SLEEP A.STANDBY SCAN MODE 3D PHONIC DVD LEVEL Follow the interactive instructions shown on the screen. To cancel the key number entry, press 7. Making Dialogues Clear—Clear Voice When you play back a disc, you can use this function—Clear Voice.
Advanced Disc Operations Remote control 10 keys DVD/CD 3 SHIFT Main unit DVD/CD # 4, 7, ¢ Programming the Playing Order— Program Play You can arrange the playing order of the chapters or tracks (up to 99) before you start playback. •...
Start playback. Playback starts in the order you DVD/CD have programmed. To skip a step: To pause: GROUP/TITLE SKIP To release, press DVD/CD 3. To check the programmed contents Before or after playback... TV CH In the reverse order. TV CH In the programmed order.
Playing Repeatedly Remote ONLY • You can also select the repeat mode using the on-screen bar (see pages 23 and 24). • For JPEG/DVD-VR discs, see page 27. Repeat Play You can repeat playback. • For DVD Video: While playing... REPEAT A-B REPEAT REP CHAP...
On-Screen Disc Operations Remote control TOP MENU/PG DVD/CD 3 ¡ ZOOM On-screen bars DVD Video Dolby D TITLE 2 CHAP CHAP 3 TITLE DVD-VIDEO 3/2.1ch TIME TIME CHAP. DVD Audio LPCM GROUP 14 TRACK 23 DVD-AUDIO 2/0.0ch TIME 1/ 3 PAGE TRACK SVCD...
Page 72
Operations Using the On-screen Bar Ex.: Selecting a subtitle (French) for DVD Video While a disc is selected as the source... Display the entire on-screen bar. ON SCREEN Dolby D TITLE 2 DVD-VIDEO 3/2.1ch Dolby D TITLE TITLE 2 DVD-VIDEO 3/2.1ch TIME CHAP.
Page 73
4 Select the repeat mode you want. Repeats a desired portion (see below). TITLE* Repeats the current title. GROUP Repeats the current group. Repeats the disc (except for DVD) or program. CHAPTER** Repeats the current chapter. TRACK** Repeats the current track. Cancels Repeat Play.
Page 74
4 Enter the desired chapter/track number. Examples: DIMMER SLEEP A.STANDBY To select chapter/track 5, press SCAN MODE To select chapter/track 15, 3D PHONIC DVD LEVEL press 1, then 5. To select chapter/track 30, press 3, then 0. • To correct a misentry, press the 10 keys until the desired number shown in the pop-up window.
Page 75
Control screen for DVD-RW/RAM in DVD-VR format The control screen is superimposed on the TV screen when you call up Program List (PG) or Play List (PL). To select playback type To select the Program To select the Play List: List: MENU/PL TOP MENU/PG...
Page 76
To select a group (for MP3/JPEG): GROUP/TITLE SKIP (at the same time) To skip a track: To stop playback: GROUP/TITLE SKIP To repeat slide-show for JPEG While playing or before playback... REPEAT A-B REPEAT REP GRP REP OFF (Canceled) REP GRP Repeats the current group. REP ALL Repeats the disc.
Advanced Tape Operations Remote control TAPE 2 3 DVD/CD 3 SHIFT Main unit PUSH OPEN 0 DVD/CD # TAPE @ # IMPORTANT It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. Recording on a Tape You can use type I tapes for recording.
Select and start playing the source—“FM,” “AM,” “DVD/CD,” or “AUX.” • When recording a disc, you can also use “Synchronized Disc Recording” (see below). Start recording. On the main unit To stop recording: Synchronized Disc Recording You can start and stop both disc play and tape recording at the same time.
Remote control KARAOKE TAPE 2 3 DVD/CD 3 AUDIO SHIFT Main unit MIC jack MIC VOLUME DVD/CD # TAPE @ # Enjoying Karaoke IMPORTANT Always set MIC VOLUME to MIN when connecting or disconnecting the microphone. DO NOT keep the microphone connected while they are not in use.
To adjust the Key (disc playback only) Activate Key Control. TOP MENU/PG KEYCON KARAOKE (at the same time) Adjust the Key (at the same time) • Key Control cannot be activated for DVD Audio/DVD- To deactivate Key Control, press KARAOKE (while holding SHIFT) to select “OFF.”...
Remote control CANCEL * Daily Timer initial settings when shipped from the factory • DAILY 1:ON Time (6:00)/OFF Time (8:00)/ Source (TUNER FM 1)/Volume level (– –) • DAILY 2:ON Time (12:00)/OFF Time (14:00)/ Source (TUNER FM 1)/Volume level (– –) •...
Page 82
5 Select the volume level. • You can select the volume level (“1” to “40” and “VOL – –”). If you select “VOL – –,” the volume is set to the last level when the unit has been turned off. Once settings are complete, the Timer setting information appears in sequence.
Setup Menu Operations Remote Control SET UP LANGUAGE menu Item MENU LANGUAGE You can select the initial menu language of DVD Video. AUDIO LANGUAGE You can select the initial audio language of DVD Video. SUBTITLE You can select the initial subtitle language of DVD Video. ON SCREEN LANGUAGE You can select “ENGLISH,”...
Page 84
AUDIO menu Item DIGITAL AUDIO OUTPUT Set this item correctly when using the DVD OPTICAL DIGITAL OUT terminal on the rear. PCM ONLY: When connecting to audio equipment which can decode only linear PCM signals. DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a built- in Dolby Digital decoder.
Additional Information Learning More about This System Introduction (see pages 1 to 2) Playable Disc Types: • If you play back an NTSC disc with this setting set to “PAL,” you can watch the playback pictures (the disc will be reproduced using “PAL 60”...
Page 86
Daily Operations—Sound & Other Adjustments (see pages 12 to 15) Adjusting the Sound: • This function also affects the sound through the headphones. Presetting Automatic DVD Video Sound Increase Level: • This also functions for DVD-VR formatted discs. Changing the Scanning Mode: •...
Page 87
Advanced Tape Operations (see pages 28 to 29) Recording on a Tape: • The recording level is automatically set correctly. Thus, you can adjust the sound you are actually listening to without affecting the recording level. • There is leader tape which cannot be recorded onto at the start and end of cassette tapes.
Page 88
Maintenance To get the best performance of the System, keep your discs, tapes, and mechanism clean. Handling discs • Remove the disc from its case by holding it at the edge while pressing the center hole lightly. • Do not touch the shiny surface of the disc, or bend the disc. •...
Page 89
Troubleshooting General: Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat procedure again. Operations are disabled. ] The built-in microprocessor may malfunction due to external electrical interference. Unplug the AC power cord and then plug it back in. Unable to operate the System from the remote control.
Page 90
Language Code List Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish Bhutani Greek Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi...
Dolby Digital bitstream 44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM DTS bitstream 32/44.1/48 kHz, 16 bit Linear PCM You can use the remote control to operate JVC’s TVs. While holding SHIFT, press... TV CH TV/VIDEO TV VOLUME +/–...