Removing The Main Board - JVC UX-S59 Service Manual

3.1.10 Removing the main board

(See Fig.10 to 13)
(1) Remove the two screws J1. (See Fig.10)
(2) Disconnect the FFC cables J2 from the connector
on main board. (See Fig.10)
(3) Disconnect the FFC cables J3 from the connector
on main board. (See Fig.11)
(4) Disconnect the FFC cables J4 from the connector
on main board. (See Fig.12)
(5) Remove main board from AMP board after disconnect the
connector J319 and CN601. (SeeFig.13)
CN661
CN402
CN681
J2
J1 J1
Fig.10
J3
Fig.11
J4
Fig.12
J4
Fig.13
(No.MB409)1-9