Fault Codes - Fisher & Paykel DishDrawer DD60SDFHTX6 User Manual

Fault codes

28
How to recognise a fault code
When a fault has occurred, the DishDrawer® will continuously beep every second.
The fault code will be displayed on the wash programme selector.
Each fault code is shown in the following chart.
How to attend to a fault code
Press the button to remove the fault code.
1
If the fault code and continuous beeps cannot be removed by pressing the
2
DishDrawer® off at the power supply.
We recommend you check the following chart and correct the fault where possible.
3
After attending to the fault, turn the DishDrawer® on at the power supply.
4
If the fault code and continuous beeps remain, turn the water and power supply off to the
5
DishDrawer®.
When calling your Authorised Service Centre, advise them of the fault code that has appeared
6
on the DishDrawer®. This information will help the Authorised Service Centre respond to your
request.
button, turn the