Operation
8
Load dishes
1
Remove all food scraps and load the dishes.
Add detergent
2
Check rinse aid
3
Press the
button
4
Select a wash programme
5
Select
(optional)
6
Check
7
Ensure there is nothing obstructing the
spray arm. The drain filter must be level with
the filter plate.
5
8
6
4
2
3
Start
8
Close the drawer and press the
Finish
9
The DishDrawer® will beep six times to
indicate the end of the wash programme. At
the end of the wash programme the drying
fan will continue to run for a set time or
until the drawer is opened. The fan assists
with drying and uses negligible amounts
of energy. It is normal for some water to
remain in the drain filter area after the wash
programme is complete.
Double models only: At the end of a wash
programme, you may find both drawers
draining simultaneously. This is normal.
button.
1
7