Filter Plate - Fisher & Paykel DishDrawer DD60SDFHTX6 User Manual

Care and cleaning
24
Cleaning the drain filter, spray arm and

filter plate

We recommend that the drain filter is cleaned
whenever there is evidence of food particles.
The spray arm and filter plate may need cleaning
about once a month in normal use or more often
should the need arise.
If a dishwasher cleaner/descaler is used, you
must run a wash programme with detergent
immediately afterward to prevent any damage to
your DishDrawer®.
Important !
The DishDrawer® must be used with the filter plate,
drain filter and spray arm correctly in place.
Cleaning the drain filter
Unplug the DishDrawer® from the power supply.
1
Lift up the drain filter access panel on the base rack (if fitted).
2
Lift and remove the drain filter.
3
Empty, rinse clean under running water and replace back into the allocated space.
4
Ensure the drain filter is flush with the filter plate.
5
Plug the DishDrawer® back into the power supply.
6
b
Internal parts of the DishDrawer® :
a Spray arm
b
Filter plate
c
Drain filter
a
c