JVC HX-Z30 Service Manual page 8

3.1.6 Rmoving the fan assembly
(See Fig.17, 18)
• Prior to performing the following procedure, remove the metal
cover, the CD changer mechanism assembly and the rear
panel.
(1) Cut the band holding the fan wire.
(2) Remove two screws G on the rear panel.
(3) Rotate fan assembly in clockwise direction to release fan
assembly from rear panel (joints c).
3.1.7 Removing the main board
(See Fig.19)
• Prior to performing the following procedure, remove the metal
cover, the CD changer mechanism assembly and the rear
panel.
(1) Cut off the band.
(2) Disconnect the card wires from connector
CN870 on the main board.
(3) Remove the screw H attaching the main board.
(4) Disconnect connector
board outward and release from the base chassis (joint d)
upward.
CN44
CN217 and CN311 on the main
Rear panel
c
Band
and
CN870
CN44
G
Fig.17
Band
c
Fan assembly
Fig.18
Main board
CN217
H
d
CN311
Fig.19
(No.MB043)1-11