JVC HX-Z30 Service Manual page 10

3.1.9 Removing the power transformer assembly
(See Fig 24, 25)
• Prior to performing the following procedure, remove the metal
cover, the CD changer mechanism assembly, the rear panel,
the main board and the bridge board / regulator board.
(1) Remove the screw N attaching the primary board.
(2) Disconnect the wire from connector
board.
(3) Remove the four screws O
transformer assembly.
(4) Detach the cord stopper from the base chassis upward.
REFERENCE:
When disconnecting the power cord from connector
the primary board, remove the fixing band.
CN231 on the primary
attaching the power
CN250 on
Power transformer
assembly
N
Fig.24
Power transformer
Primary board
assembly
CN231
O
Fig.25
Primary board
CN250
FIxing band
Cord stopper
O
(No.MB043)1-13