JVC HX-Z30 Service Manual page 11

3.2 Front panel assembly
• Prior to performing the following procedure, remove the metal
cover, the CD changer mechanism assembly and the front
panel assembly.
3.2.1 Removing the cassette mechanism assembly
(See Fig.26)
(1) Disconnect the card wire from connector
amplifier & mechanism control board.
(2) Remove the two screws P, and the two screws Q
attaching the cassette mechanism assembly.
3.2.2 Removing the headphone board (See Fig.26)
(1) Remove the screw R and pull out the headphone board
backward.
(2) Cut off the band.
3.2.3 Rmoving the switch / micon board
(See Fig.27~29)
• Prior to performing the following procedure, disconnect the
card wire from CN43 on the micon board.
(1) Disconnect the card wire from connector
micon board.
(2) Remove the fifteen screws S attaching the switch / micon
board.
(3) Remove the spacer fixing the wire.
(4) Move the switch /micon board in the direction of the arrow
to disconnect the wire from connector
on the micon board.
S
S
CN43
1-14 (No.MB043)
CN33 on the head
CN840
CN880 and
Switch board
Spacer
S
Micon board
CN840
S
Fig.27
Head amplifier &
mechanism control board
CN33
P
on the
CN900
Band
Q
Q R
Headphone board
Fig.26
Switch board
Spacer
Fig.28
Switch board
CN880 CN840 CN900
Micon board
CN43
Fig.29