Safety Information; Think Safety First - Toro 520XI Service Manual

This symbol means WARNING or
PERSONAL SAFETY
INSTRUCTION - read the
instruction because it has to do
with your safety. Failure to comply
with the instruction may result in
personal injury or even death.
This manual is intended as a service and repair
manual only. The safety instructions provided herein
Avoid unexpected starting of engine...
Always turn off the engine and disconnect the spark
plug wire(s) before cleaning, adjusting, or repair.
Avoid lacerations and amputations...
Stay clear of all moving parts whenever the engine is
running. Treat all normally moving parts as if they
were moving whenever the engine is running or has
the potential to start.
Avoid burns...
Do not touch the engine, muffler, or other
components which may increase in temperature
during operation, while the unit is running or shortly
after it has been running.
Avoid fires and explosions...
Avoid spilling fuel and never smoke while working
with any type of fuel or lubricant. Wipe up any spilled
fuel or oil immediately. Never remove the fuel cap or
add fuel when the engine is running. Always use
approved, labeled containers for storing or
transporting fuel and lubricants.
Avoid asphyxiation...
Never operate an engine in a confined area without
proper ventilation.
5xi Series Tractor Service Manual
are for troubleshooting, service, and repair of the
5xi series garden tractor. The tractor and attachment
operator's manuals contain safety information and
operating tips for safe operating practices. Operator's
manuals are available through your local Toro
distributor or:
The Toro Company
Publications Department
8111 Lyndale Avenue South
Bloomington, MN 55420

THINK SAFETY FIRST

Avoid injury from batteries...
Battery acid is poisonous and can cause burns. Avoid
contact with skin, eyes, and clothing. Battery gases
can explode. Keep cigarettes, sparks, and flames
away from the battery.
Avoid injury due to inferior parts...
Use only original equipment parts to ensure that
important safety criteria are met.
Avoid injury to bystanders...
Always clear the area of bystanders before starting or
testing powered equipment.
Avoid injury due to projectiles...
Always clear the area of sticks, rocks, or any other
debris that could be picked up and thrown by the
powered equipment.
Avoid modifications...
Never alter or modify any part unless it is a factory
approved procedure.
Avoid unsafe operation...
Always test the safety interlock system after making
adjustments or repairs on the machine. Refer to the
Electrical chapter later in this manual for more
information.

SAFETY INFORMATION

1a
1 - 3