Toro 520XI Service Manual page 18

CHASSIS
GREASING AND LUBRICATION (cont'd)
There are 3 zerk fittings located on the mower
deck spindles. Apply grease until resistance is
felt from the grease gun handle (2-3 pumps).
Also lubricate the mower deck idler arm on
decks so equipped.
The 60" deck has zerk fittings on the gage
wheels, grease every 25 hours of operation.
22
There is 1 zerk fitting located on the foot pedal
shaft which requires greasing.
Models with manual steering have a lubrication
point on the steering gear. Do not force
excessive amounts of grease into this fitting
(one pump of the grease gun handle only).
2 - 6
2.0415.001
2.0415.012
2.0144.069
5xi Series Tractor Service Manual