Safety; Safe Operating Practices - Toro Wheel Horse 520xi Operator's Manual

For your convenience, write the product model and serial
numbers in the space below.
Model No:
Serial No.
Read this manual carefully to learn how to operate and
maintain your product correctly. Reading this manual will
help you and others avoid personal injury and damage to
the product. Although we design, produce and market
safe, state-of-the-art products, you are responsible for
using the product properly and safely. You are also
responsible for training persons, who you allow to use the
product, about safe operation.
The warning system in this manual identifies potential
hazards and has special safety messages that help you and
others avoid personal injury, even death. Danger,
Warning, and Caution are signal words used to identify
the level of hazard. However, regardless of the hazard, be
extremely careful.
Danger signals an extreme hazard that will cause serious
injury or death if the recommended precautions are not
followed.
Warning signals a hazard that may cause serious injury or
death if the recommended precautions are not followed.
Caution signals a hazard that may cause minor or
moderate injury if the recommended precautions are not
followed.
Two other words are also used to highlight information.
Important calls attention to special mechanical
information, and Note emphasizes general information
worthy of special attention.
Determine the left and right side of the machine from the
normal operating position.

Safety

This machine meets or exceeds the B71.1-1998
specifications of the American National Standards
Institute, in effect at the time of production. However,
improper use or maintenance by the operator or owner
can result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay
attention to the safety alert
CAUTION, WARNING, or DANGER—"personal
safety instruction." Failure to comply with the
instruction may result in personal injury or death.
symbol, which means
3

Safe Operating Practices

The following instructions are from the CEN standard EN
836:1997.
This product is capable of amputating hands and feet and
throwing objects. Always follow all safety instructions to
avoid serious injury or death.
Training
Read the instructions carefully. Be familiar with the
controls and the proper use of the equipment.
Never allow children to use the lawnmower. Never
allow people unfamiliar with these instructions to use
the lawnmower. Local regulations can restrict the age
of the operator.
Never mow while people, especially children, or pets
are nearby.
Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
Do not carry passengers.
All operators should seek and obtain professional and
practical instruction. Such instruction should
emphasize:
the need for care and concentration when working
with ride-on machines;
control of a ride-on machine sliding on a slope will
not be regained by the application of the brake.
The main reasons for loss of control are:
insufficient wheel grip;
being driven too fast;
inadequate braking;
the type of machine is unsuitable for its task;
lack of awareness of the effect of ground
conditions, especially slopes;
incorrect hitching and load distribution.
Preparation
While mowing, always wear substantial footwear and
long trousers. Do not operate the equipment when
barefoot or wearing open sandals.
Thoroughly inspect the area where the equipment is to
be used and remove all objects which may be thrown
by the machine.
WARNING—Fuel is highly flammable.
Store fuel in containers specifically designed for
this purpose.