Toro 520XI Service Manual page 30

CHASSIS
SMART TURN™ STEERING (cont'd)
If the slider is not adjusted correctly,
loosen jam nuts (E), and turn the link to
adjust the length. Then tighten the jam
nuts securely.
NOTE: The front jam nut is left hand
thread, and the rear jam nut is right hand
thread.
NOTE: Jam nuts "E" are marked with
paint at the factory to discourage
unnecessary tampering.
22
3. Test the adjustment of link (F) (see page
2-16). If adjustment is necessary:
A. Depress the brake. Push forward lightly
on link (F) to remove slack from the
system.
G - Rear Jam Nut (Right Hand Thread)
H - Front Jam Nut (Left Hand Thread)
I - Front Rod End Fitting
Check the bushing (A) making sure it is
centered in the slot in the brake pivot plate
(B). If the bushing contacts the sides of the
slot, loosen jam nuts (G and H), and turn the
link until the bushing is centered in the slot.
2 - 18
2.0144.085
2.0144.059
2.0144.089
5xi Series Tractor Service Manual