Using Call Park - Nortel 1110 User Manual

While on an active call
If the transferred call is not answered, your telephone rings:
Trans
or
(Goodbye)

Using Call Park

Use the Call Park feature to hold temporarily (park) and retrieve a call
from any telephone. Using Call Park does not tie up a line. When
configured network-wide, Call Park can be used across networks. A
System Park extension can be configured to automatically park most
calls.
To park a call on the System Park DN or your own DN:
Park
52
1. Lift the handset to reconnect to the
original caller.
2. Choose one of the following:
— Press the
— If the transfer is picked up while you
During an active call, press the
context-sensitive soft key twice.
Note: By default, the call is parked on
Park
your DN unless a
enabled to automatically park calls on
the system.
Transfer
soft key and repeat the transfer.
are on the line, press the
key to complete the transfer.
System Park DN
context-sensitive
Goodbye
Park
is