Button Label Area; Information Area; Feature Options Area; About Programmable Buttons - Nortel IP Phone 2002 User Manual

8 Chapter 1 Getting started
Figure 3 shows an example of the display and describes each area.
Figure 3 Display area
Forward

Button label area

The button label area shows the label and status of the four programmable memory buttons. For
more information about these buttons, refer to
number or feature." on page

Information area

The Information area shows:
• the date and time when the telephone is not in use, and changes to show features and call
information when the telephone is in use.

Feature options area

When a feature is activated, or when you are on an active call, the display command line shows
you the action you must take to proceed.
For example: Pswd. This means you must enter your mailbox password.
The Feature options area shows the label for the
These button labels appear in capital letters directly above the Feature and display buttons, and to
the right of the
use.

About programmable buttons

Your System Administrator assigns the four programmable buttons as line, intercom, or memory
buttons. The label for each button appears on the display next to the button. For more information,
see your System Administrator.
NN40050-107 NN40050-107
Call fwd Page gen
Conference Intercom
07/24 3:12 pm
Timer
DND
15.
FEATURE
label on the display. These button labels vary depending on the feature in
Button label area
Information area
More
Feature options area
"You can program a memory button with a new
FEATURE
button and for the three display buttons.