6
Getting started
Figure 3 shows an example of the display and describes each area.
Figure 3 Display area
Feature
Button label area
The button label area shows the label and status of the six programmable memory buttons. For
more information about these buttons, refer to
Note: Dial pad buttons N, G, H, O and Q can also be programmed as memory buttons.
Information area
The Information area shows:
•
the extension number of the telephone (DN: 340)
•
a line for general information (Nortel Networks)
•
the date and time when the telephone is not in use, and changes to show features and call
information when the telephone is in use
Feature options area
When a feature is activated, or when you are on an active call, the display command line shows
you the action you must take to proceed.
For example: Pswd . This means you must enter your mailbox password.
The Feature options area shows the label for the
These button labels appear in capital letters directly above the Feature and display buttons, and to
the right of the
use.
P0995216 03
Call fwd
Page gen
Conference
Intercom
Last num
Intercom
DN: 340
Nortel Networks
April 25 10:51 am
FEATURE
label on the display. These button labels vary depending on the feature in
Button label area
Information area
Feature options area
"Program memory buttons" on page
FEATURE
button and for the three display buttons.
12.