Peel-Off (Self-Strip) - Intermec EasyCoder PM4i User Manual

Chapter 4 — Media Load
Peel-Off (Self-strip)
The EasyCoder PM4i can print on labels, tickets, tags, and continuous
stock in various forms. This section describes the case when self-adhesive
labels are separated from the liner immediately after printing, which
requires optional integral self-strip unit with liner takeup. This is also
known as "Self-strip" operation.
Peel-off operation cannot be performed when an optional fan-fold guide
fi tted.
Use the <Feed> key (see fi gure #14) when loading the same type of
media. When switching to a new type of media, or if the printer does not
feed out the media properly, simultaneously press the <Shift> and <Feed>
keys to perform a "testfeeed."
Peel-off can only be used for:
• Self-adhesive labels with liner
An optional label-taken sensor can hold the printing of the next label
in a batch until the present label has been removed, see Chapter 9,
"Options."
24 Intermec EasyCoder PM4i User's Guide (Fingerprint version)