Intermec EasyCoder PM4i User Manual page 74

Chapter 7 — Setup Mode
Setup Mode; Print Defs
(Intermec Fingerprint v8.00)
SETUP:
Continued from
PRINT DEFS
the previous page
PRINT DEFS:
HEAD RESIST
HEAD RESIST:
[nnn]:
Read-only
PRINT DEFS:
LTS
LTS:
LTS ADJUST
REMOVE LABEL AND
PRESS ENTER
SENSITIVITY 10
OUT OF 9-10
66
PRINT DEFS: PRINT DEFS:
TESTPRINT PRINT SPEED
TESTPRINT: PRINT SPEED:
DIAMONDS [100]:
TESTPRINT:
CHESS
TESTPRINT:
BAR CODES #1
TESTPRINT:
BAR CODES #2
TESTPRINT:
SETUP INFO
TESTPRINT:
HARDWARE INFO
TESTPRINT:
NETWORK INFO
Scroll forward
Scroll back
<Enter> to print
<?> for error info
Only displayed if an optional LTS (Label Taken
Sensor) is installed in the printer.
LTS: LTS:
LTS TEST LTS VALUE
REMOVE LABEL LTS VALUE:
ENTER TO STOP [10]:
Intermec EasyCoder PM4i User's Guide (Fingerprint version)
Return to the start of the Setup Mode loop
(SETUP/SER-COM, UART1) or press <Setup>
to exit the Setup Mode.
Only displayed if an
optional EasyLAN board
is installed.