Intermec EasyCoder PM4i User Manual page 76

Chapter 7 — Setup Mode
Setup Mode; Serial Communication "uart3:" (option)
(Intermec Fingerprint v8.00)
SETUP:
See Appendix C "Interfaces" for information on how the uart numbers relate to the physical communication ports.
SER-COM, UART3
SER-COM, UART3: SER-COM, UART3:
BAUDRATE CHAR LENGTH
BAUDRATE; CHAR LENGTH
9600 8
BAUDRATE; CHAR LENGTH
19200 BAUDRATE;
7
38400 BAUDRATE;
57500
BAUDRATE;
115200 BAUDRATE;
300 BAUDRATE;
600
BAUDRATE;
1200 BAUDRATE;
2400 BAUDRATE;
4800
FLOW CONTROL:
XON/XOFF
XON/XOFF:
DATA TO HOST
DATA TO HOST:
DISABLE
DATA TO HOST:
ENABLE
SER-COM, UART3:
CONNECTED HW
CONNECTED HW:
RS232
Read-only
68
SER-COM, UART3: SER-COM, UART3:
PARITY STOP BITS
PARITY: STOP BITS:
NONE 1
PARITY:
EVEN
PARITY:
ODD
PARITY:
MARK
PARITY:
SPACE
SER-COM, UART3:
NEW LINE
NEW LINE:
CR/LF
XON/XOFF:
DATA FROM HOST
DATA FROM HOST:
DISABLE
DATA FROM HOST:
ENABLE
Intermec EasyCoder PM4i User's Guide (Fingerprint version)
SER-COM, UART3:
FLOWCONTROL
FLOW CONTROL:
RTS/CTS
STOP BITS:
2
RTS/CTS:
DISABLE ENQ/ACK:
ENABLE
SER-COM, UART3:
REC BUF
REC BUF:
[1024]:
NEW LINE:
LF
NEW LINE:
CR
FLOW CONTROL:
ENQ/ACK
ENQ-ACK:
DISABLE ENQ/ACK:
ENABLE
SER-COM, UART3:
TRANS BUF
TRANS BUF:
[1024]: