®
Invacare
- Dragon Vertic
10.2.1 Armrest Top Assembly
· Remove the hand wheel (6).
· Release the bolts (4) with a 4mm hex wrench to remove the armpad.
10.2.2 Armrest Lower Assembly
· Remove hand wheel (6).
· Push fixing nut into tube, to release plastic ring and remove both from armrest lower tube.
· Repeat step 3, for armrest socket fixing nut.
To re-assemble reverse the above steps taking care not to over tighten the fixing screws.
11
Legrests
Descriptions:
1 Hanger bracket
2 Cap
3 Bolt
4 Stud
5 Outer tube
6 Front leg
7 Domed nut
8 Inner tube
9 Footplate bracket
10 Footplate mount
11 Footplate
12 Bolt
13 Bolt
14 Insert
15 Mounting washers
SERVICE MANUAL
21