Replacement Bulbs - Hummer H2 2009 Owner's Manual

Hide thumbs Also See for H2 2009:

Table of Contents

The vehicle may have a taillamp in the bumper.

To replace it:

2. Turn the bulb socket counterclockwise and remove

it from the lamp housing.

3. Remove the bulb from the bulb socket.

4. Install the new bulb into the bulb socket.

5. Reinstall the bulb socket into the lamp housing and

turn it clockwise to lock it.

1. Locate the affected

taillamp which is

behind and under

Replacement Bulbs

Exterior Lamp

Back-up Lamp

Daytime Running Lamp (DRL)

Front Turn Signal and

Parking Lamp

Low-Beam and High-Beam

Taillamp and Stoplamp

Rear Taillamp in Bumper

Rear Turn Signal Lamp

Roof Marker Lamp Center

Roof Marker Lamp Corner

For replacement bulbs not listed here, contact your

dealer/retailer.

4157K or 3157KX

Show Quick Links

Table of Contents