Headlamps; Replacement Bulbs - Hummer 2006 H3 Owner's Manual

Passenger's Side
Shown
3. Remove the taillamp assembly by pulling it gently to
release the two locator tabs. The locator tabs
connect the taillamp assembly to the vehicle's frame.
4. Turn the bulb socket counterclockwise to remove it
from the taillamp housing.
2. Remove the two screws
from the taillamp
assembly.
5. Replace with a new bulb.
6. Insert the bulb into the taillamp housing and turn it
counterclockwise until it is locked into place.
7. Reinstall the rear lamp assembly by lining up the
locator tabs with the holes in the vehicle's frame.
8. Reinstall the two screws.

Replacement Bulbs

Exterior Lamp
Back-up Lamp, Stoplamp,
Taillamp and Turn Signal Lamp
Low-Beam and High-Beam
Headlamp
For replacement bulbs not listed here, contact your
dealer.
Bulb Number
3157K
H13
5-51