Replacement Bulbs - Hummer 2007 H2 Owner's Manual

Hide thumbs Also See for 2007 H2:

Table of Contents

Your vehicle may have a taillamp in the bumper.

To replace it, do the following:

2. Turn the bulb socket counterclockwise and

remove it from the lamp housing.

3. Remove the bulb from the bulb socket.

4. Install the new bulb into the bulb socket.

5. Reinstall the bulb socket into the lamp housing

and turn it clockwise to lock it.

1. Locate the affected

taillamp which is

under the bumper.

Replacement Bulbs

Exterior Lamp

Back-up Lamp

Daytime Running Lamp (DRL)

Front Turn Signal and

Parking Lamp

Low-Beam and High-Beam

Rear Taillamp and Stoplamp

Rear Taillamp in Bumper

Rear Turn Signal Lamp

Roof Marker Lamp Center

Roof Marker Lamp Corner

For replacement bulbs not listed here, contact

your dealer.

4157K or 3157KX

Table of Contents