Returning The Seat To An Upright Position - Hummer H2 2009 Owner's Manual

Returning the Seat(s) to an Upright
Position
CAUTION:
{
If either seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatbacks to be sure they
are locked.
CAUTION:
{
A safety belt that is improperly routed, not properly
attached, or twisted will not provide the protection
needed in a crash. The person wearing the belt
1-12
CAUTION: (Continued)
CAUTION: (Continued)
could be seriously injured. After raising the rear
seatback, always check to be sure that the safety
belts are properly routed and attached, and are
not twisted.
To return the seat(s) to the upright position:
1. Lift the seatback up and push it rearward all
the way.
2. Lower the seat cushion until it latches into position.
3. Pull forward on the seatback and up on the seat
cushion to make sure the seat is securely in
place.
4. Return the head rest (SUV only) to the upright
position.