Table of Contents
Advertisement
SNMP
Select either Network or Host as the local type setting.
Enter the Remote Server IP address in the text box.
8 If you want to enter details of the remote network, check the Remote
Network Setting - Enable check box, then enter the Remote Network
Address and Remote Subnet Mask.
9 Click Apply to save the settings.
SNMP (Simple Network Management Protocol) allows remote
management of your Router by a PC that has an SNMP management
agent installed.
You can configure the following SNMP parameters:
Community — This configures the SNMP community string, which
authenticates remote users.
Trap — You can also configure the Router to send status messages to
the SNMP management agent if a problem occurs on the network.
This is done by using Traps.
To set up SNMP Community and Trap parameters, do the following:
1 Select SNMP from the main menu. The SNMP screen displays
Figure 48 SNMP Screen
2 Select Enable to activate SNMP.
SNMP
71
(Figure
48).
Hide quick links:
Advertisement
Table of Contents
