4
Accessing the
Wizard
R
UNNING THE
The Router setup program is Web-based, which means that it is accessed
through your Web browser (Netscape Navigator or Internet Explorer).
To use the Setup Wizard:
1 Ensure that you have at least one computer connected to the Router.
Refer to
Chapter 2
2 Launch your Web browser on the computer.
3 Enter the following URL in the location or address field of your browser:
http://192.168.1.1 (as shown in
Figure 9 Web Browser Location Field (Factory Default)
S
ETUP
for details on how to do this.
Figure
W
IZARD
9).