3Com OfficeConnect 3CR858-91 User Manual page 44

44 C 5: R
HAPTER OUTER
C
ONFIGURATION
Dynamic IP Address (automatically allocated) — see
PPPoE (used by DSL providers only) — see
PPTP (used by some European providers) — see
L2TP (supported by some ISPs) — see
Static IP Address (to be specified manually) — see
Dynamic IP Address
To configure the dynamic IP address connection for your Router:
1 Select Dynamic IP Address and then click Next. The Dynamic IP Screen
displays (see Figure
Figure 25 Internet Settings - Dynamic IP Screen
2 Some ISPs require a host name. If your ISP has this requirement, enter the
host name in the Host Name text box .
3 Either:
If your ISP requires an assigned MAC address, enter the values for a
MAC address. Or,
If the computer you are now using is the one that was previously
connected directly to the cable modem, select Clone.
4 Check all of your settings and then click Apply.
25).
page 44.
page 45
page 46
page 47
page 48