3Com OfficeConnect 3CR858-91 User Manual page 78

78 C 5: R
HAPTER OUTER
C
ONFIGURATION
To configure time zone settings:
1 Select System Tools from the main menu, then select Time Zone from the
sub-menu. The Time Zone screen displays
Figure 54 Time Zone Screen
2 Select the Base Date and Base Time. The Router will use these settings if it
is unable to connect to the Internet or SNTP Server.
3 To enable SNTP, check the Using Time Server (NTP) check box.
4 Select a time zone from the Set Time Zone drop down list.
5 Enter the interval, in hours, at which to want the Router to resynchonize
with the SNTP Server, at the Synchonization Interval text box. The default
is every 24 hours.
6 Select a primary SNTP server, and if required a secondary SNTP server
from the appropriate drop down boxes.
7 If you want to enable daylight saving, check the Daylight Savings check
box.
8 Select the month and day that you want daylight savings to begin at Start
Time, and select the month and day that you want daylight davings to
end at End Time.
The Daylight Savings option advances the system clock by one hour
between the dates that you specify in the Start Time and End Time drop
down lists. It does not cause the system clock to be updated for daylight
savings time automatically.
9 Click Apply to save the settings.
(Figure 54).