Ubee DDW365 User Manual page 78

Ubee Interactive
54g™ Mode
XPress™ Technology
802.11n Protection
Short Guard Interval
Basic Rate Set
Multicast Rate
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014
Label
Selects the network mode in which to run the DDW365. The
options are:

54g auto – self adaptive connection

54g performance – highest speed

54g LRS – limited speed

802.11b – connections to 11b clients only.
This field can be set only if 802.11-n Mode is set to Off in the
Radio screen as discussed on
on page
Enables or disables the XPress feature. XPress™ is a
standards-based frame-bursting approach to improve 802.11g
wireless LAN performance developed by Broadcom. When
Xpress enabled, aggregate throughput can improve up to 27%
in 802.11g-only networks, and up to 75% in mixed networks
comprised of 802.11g and 802.11b standard equipment.
Defines the 802.11n Protection setting.

Auto - the DDW365 uses Request to Send/Clear to Send
(RTS/CTS) to improve the performance in 802.11 mixed
environments.

Off - the 802.11 performance is maximized under most
conditions, while the other 802.11 modes (802.11b, etc.) are
secondary.
Defines a transmission interval so data transmissions do not
interfere with each another.
Selects the rate that all wireless clients must support to connect
to the DDW365. The options are All and Default.
Specifies the rate at which multicast packets are transmitted and
received on your wireless network.
Description
Using the Wireless Radio Option
66.
Using the Advanced Option
74