Supplementary Services - Linksys 900 Series Administrator's Manual

Chapter 5 900 Series phone Field Reference

Supplementary Services

The 900 Series phone provides native support of a large set of enhanced or supplementary services. All
of these services are optional. The parameters listed in the following table are used to enable or disable
a specific supplementary service. A supplementary service should be disabled if a) the user has not
subscribed for it, or b) the Service Provider intends to support similar service using other means than
relying on the 900 Series phone.
Field
Block CID Setting
Block ANC Setting
DND Setting
Secure Call Setting
Dial Assistance
Auto Answer Page
Preferred Audio Device
Send Audio to Speaker
Time Format
Date Format
Miss Call Shortcut
Accept Media Loopback
Request
Media Loopback Mode
Media Loopback Type
Document Version 3.1
Description
Block Caller ID on/off for all calls.
The default is no.
Block Anonymous Calls on or off.
The default is no.
DND on or off.
The default is no.
If yes, all outbound calls are secure calls by default.
The default is no.
If enabled, the phone LCD displays a list of up to 10 matching numbers as the user presses
each key on the numeric keypad.
If enabled, the phone automatically picks up a call and directs the audio signal to the
speakerphone without user intervention.
Specifies the preferred audio device (Speaker or Headset). When set to Speaker, the user
can enable the headset using the Preferences > Preferred Audio Device (Menu 5,6) option.
When set to Headset, the same option is used to enable the speakerphone.
If enabled, when the user is using the handset, the audio from the remote end will be
played out on the speaker in addition to the handset (so that a supervisor and listen in).
Toggles the LCD display between a 12-hour and 24-hour clock.
Changes the order in which month and day are displayed.
Enables or disables the display of missed calls on the LCD display.
Determines how the media loopback request is enabled. Choose automatic, never, or
manual.
The default is automatic.
Determines the media loopback mode. Choose source or mirror.
Determines the media loopback type. Choose media or packet.
Linksys 900 Series IP Phone Administrator Guide
User
5-47