Linksys 900 Series Administrator's Manual page 126

Regional Tab
Dist Ring Deact Code
Speed Dial Act Code
Secure All Call Act Code
Secure No Call Act Code
Secure One Call Act Code
Secure One Call Deact Code
Paging Code
Call Park Code
Call Pickup Code
Call UnPark Code
Group Call Pickup Code
Conference Act Code
Attn-Xfer Act Code
Modem Line Toggle Code
FAX Line Toggle Code
Linksys 900 Series IP Phone Administrator Guide
5-24
Disables the distinctive ringing feature.
The default is *46.
Assigns a speed dial number.
The default is *74.
Makes all outbound calls secure.
The default is *16.
Makes all outbound calls not secure.
The default is *17.
Makes the next outbound call secure. (It is redundant if all outbound calls are secure by
default.)
The default is *18.
Makes the next outbound call not secure. (It is redundant if all outbound calls are not
secure by default.)
The default is *19.
The star code used for paging the other clients in the group.
The default is *96.
The star code used for parking the current call.
The default is *38.
The star code used for picking up a ringing call.
The default is *36.
The star code used for picking up a call from the call park.
The default is *39.
The star code used for picking up a group call.
The default is *37.
If this code is specified, the user must enter it before dialing the third party for a
conference call. Enter the code for a conference call.
If the code is specified, the user must enter it before dialing the third party for a call
transfer. Enter the code for a call transfer.
Toggles the line to a modem.
The default is *99. Modem pass-through mode can be triggered only by pre-dialing this
code.
Toggles the line to a fax machine. (Not in PAP2T)
The default is #99.
Chapter 5 900 Series phone Field Reference
Document Version 3.1