Linksys 900 Series Administrator's Manual page 83

Chapter 3 Managing Linksys 900 Series IP Phones
•
Unblock Caller ID Per Call (*82)—Unblocks caller ID on the next outbound call (on the current call
appearance only).
•
Secure All Calls (*16)—Defaults to prefer to use encrypted media for all outbound calls. Applies to
all extensions.
•
Secure No Calls (*17)—Defaults to prefer to use unencrypted media for all outbound calls. Applies
to all extensions.
•
Secure Next Call (*18)—Prefers to use encrypted media for the next outbound call (on this call
appearance only).
•
Do Not Secure Next Call (*19)—Prefers to use unencrypted media for the next outbound call (on
this call appearance only).
•
Do Not Disturb (*78)—Applies to all extensions.
•
Cancel Do Not Disturb (*79)—Applies to all extensions.
•
Block Anonymous Calls—Applies to all extensions.
•
Cancel Block Anonymous Calls—Applies to all extensions.
•
Blind Transfer (*98)
•
Prefer G.711u (*017110)—Sets preferred codec to G.711u for next outbound call.
•
Prefer G.711a (*017111)—Sets preferred codec to G.711a for next outbound call.
•
Prefer G.723 (*01723)—Sets preferred codec to G.723 for next outbound call.
•
Prefer G.726r16 (*0172616)—Sets preferred codec to G.726r16 for next outbound call.
•
Prefer G.726r24 (*0172624—Sets preferred codec to G.726r24 for next outbound call.
•
Prefer G.726r32 (*0172632)—Sets preferred codec to G.726r32 for next outbound call.
•
Prefer G.726r40 (*0172640)—Sets preferred codec to G.726r40 for next outbound call.
•
Prefer G.729a (*01729)—Sets preferred codec to G.729a for next outbound call.
•
Force G.711u (*027110)—Forces G.711u for next outbound call.
•
Force G.711a (*027111)—Forces G.711a for next outbound call.
•
Force G.723 (*02723)—Forces G.723 for next outbound call.
•
Force G.726r16 (*0272616)—Forces G.726r16 for next outbound call.
•
Force G.726r24 (*0272624—Forces G.726r24 for next outbound call.
•
Force G.726r32 (*0272632)—Forces G.726r32 for next outbound call.
•
Force G.726r40 (*0272640)—Forces G.726r40 for next outbound call.
•
Force G.729a (*02729)—Forces G.729a for next outbound call.
When off-hook dialing, the star code is processed by the phone as soon as it is entered and
processed by the phone. When on-hook dialing, the user can pre-dial multiple star codes before
the target number. The star codes are handled in the order they are entered, before the target
number is dialed. The *code soft key indicates the *codes available. Star codes can also be
included in a directory entry or redial list.
In addition there are two special codes:
•
Referral Services Codes
Document Version 3.1
Linksys 900 Series IP Phone Administrator Guide
System Administration
3-33