Ring Tone - Linksys 900 Series Administrator's Manual

Phone Tab
Field
CFWD Busy Serv
CFWD On No Answer Serv
Paging Serv
Call Park Serv
Call Pick Up Serv
ACD Login Serv
Group Call Pick Up Serv
ACD Ext

Ring Tone

Each entry defines a ring tone to be used on the phone, with an ID between 1 and 10. The ID can be used
in a DirEntry to indicate which ring tone to use when the corresponding caller calls.
Field
Ring 1
Ring 2
Ring 3
Ring 4
Ring 5
Ring 6
Ring 7
Ring 8
Ring 9
Ring 10
Linksys 900 Series IP Phone Administrator Guide
5-34
Description
Enable/disable call-forward-on-busy service
Enable/disable call-forward-on-no-answer service
Enable/disable the paging service
Enable/disable the call park service
Enable/disable the call pickup service
Enable/disable the ACD Login Service, used for call centers. Typically enabled with the
<SIP-B> parameter.
Enable/disable the group call pickup service
The extension used for handling ACD calls.
Default 1 or 2
Description
Ring tone script for Ring 1. The default is n=Classic-1;w=3;c=1.
Ring tone script for Ring 2. The default is n=Classic-2;w=3;c=2.
Ring tone script for Ring 3. The default is n=Classic-3;w=3;c=3.
Ring tone script for Ring 4. The default isn=Classic-4;w=3;c=4.
Ring tone script for Ring 5. The default isn=Simple-1;w=2;c=1.
Ring tone script for Ring 6. The default isn=Simple-2;w=2;c=2.
Ring tone script for Ring 7. The default isn=Simple-3;w=2;c=3.
Ring tone script for Ring 8. The default isn=Simple-4;w=2;c=4.
Ring tone script for Ring 9. The default isn=Simple-5;w=2;c=5.
Ring tone script for Ring 10. The default isn=THx;w=4;c=7.
Chapter 5 900 Series phone Field Reference
Document Version 3.1