User; Speed Dial - Linksys 900 Series Administrator's Manual

User

User
This section describes the fields for the following headings on the User 1 and User 2 tabs:
•
•
•
•
Call Forward
Field
Cfwd All Dest
Cfwd Busy Dest
Cfwd No Ans Dest
Cfwd No Ans Delay

Speed Dial

Field
Speed Dial 2/3/4/5/6/7/8/9
Linksys 900 Series IP Phone Administrator Guide
5-46
Call Forward, page 5-46
Speed Dial, page 5-46
Supplementary Services, page 5-47
Audio Volume, page 5-48
Description
Forward number for Call Forward All Service
In addition to normal call forward destination as used in the other ATAs, on the SPA3102,
you can specify the following additional parameters:
•
gw0 – forward the caller to use the PSTN gateway
•
<pstn-number>@gw0 – forward to caller to the PSTN number (dialed automatically
by the SPA through the PSTN gateway)
The default is blank.
Forward number for Call Forward Busy Service. Same as Cfwd All Dest.
The default is blank.
Forward number for Call Forward No Answer Service. Same as Cfwd All Dest.
In addition to normal call forward destination as used in the other ATAs, on the SPA3102,
you can specify the following additional parameters:
•
gw0 – forward the caller to use the PSTN gateway
•
<pstn-number>@gw0 – forward to caller to the PSTN number (dialed automatically
by the SPA through the PSTN gateway)
The default is blank.
Delay in sec before Call Forward No Answer triggers. Same as Cfwd All Dest.
The default is 20.
Description
Target phone number (or URL) assigned to speed dial 2, 3, 4, 5, 6, 7, 8, or 9.
The default is blank.
Chapter 5 900 Series phone Field Reference
Document Version 3.1