Table of Contents
Advertisement
WW
(
)
XX
E X2
Insert venturi tube into valve
Step 10
a) Place the four heat plates (RR) inside the grill on
the burners.
b) Place the three cooking grates (SS) inside the
grill on the heat plates.
c) Insert the four feet of warming rack (TT) into the
holes on top of grill body.
d) Hook the cup support (UU) into the holes on
grease tray and place the grease cup (VV) on
the cup support.
e) Insert and screw the stopper (H) into the hole on
the upper cart back beam.
CAUTION: Don't take away the stopper (H) from
the back beam, otherwise that could result in fire
or explosion that could cause property damage,
personal injury or death.
GSF3016A
Owner's Manual
(
)
E X4
(
)
F X4
QQ
Place the ignition cable onto
(
)
G X4
the electrode .
Step 9
a) Align the holes on side knob seat (XX) with the holes on
the right side shelf and side burner valve. Screw one
bolt (E) into each pre-drilled hole.
b) Tighten the bolts using the screwdriver provided. Insert
the side burner knob (WW) into knob shaft of valve.
c) Open the side burner lid and place the side burner
assembly (QQ) on the right side shelf. Connect the
venturi tube and the side valve by overlapping 0.78"
between venturi tube and nozzle .
d) Align the holes on the side burner assembly with the
holes on the right side shelf.
e) Insert one bolt (E) and one flat washer (F) into each
pre-drilled hole and screw one nut (G) onto each bolt by
hand.
f) Go back and tighten all the bolts using screwdriver
provided.
g) Connect the side burner ignition cable by inserting it
onto the electrode. Make certain the connection is
secure.
11
Advertisement
Table of Contents
