Table of Contents
Advertisement
102
Picture and Sound Controls
Using the advanced picture settings features
MPEG NR
The MPEG noise reduction feature allows you to reduce visible
interference caused by MPEG compression.
1
Press the MENU button.
2
Select Picture > Advanced Picture Settings > Noise Reduction
and press the OK button.
3
Press the p / q (arrow) buttons to select MPEG NR and press the
OK button.
4
Press the p / q (arrow) buttons to select Low,
Off.
5
Press the EXIT button.
NOTE
DNR (Dynamic Noise Reduction)
DNR is a Dynamic Noise Reduction technology that filters out video
noise without decreasing picture sharpness.
1
Press the MENU button.
2
Select Picture > Advanced Picture Settings > Noise Reduction
and press the OK button.
3
Press the p / q (arrow) buttons to select DNR and press the OK
button.
4
Press the p / q (arrow) buttons to select Low, Middle, High, Auto,
or Off.
5
Press the EXIT button.
NOTE
If the picture mode is set to Game or PC, this feature is not available.
The differences may not always be noticeable. For the best results, use
lower settings, as picture quality may be greatly reduced if the setting is too
high.
If the picture mode is set to Game or PC, this feature is not available.
Middle,
High, or
Advertisement
Table of Contents
