Other Hdmi Cec Control Functions; Using The Hdmi® Rgb Range Feature - Toshiba 42L6200U User Manual

®
Other HDMI CEC Control functions
When Enable HDMI
®
HDMI
functions will be enabled:
Item:
TV Auto Power
Auto Standby
Amplifier
Speaker Preference With this item, you can set your audio output preference to the TV
NOTE
Using the HDMI
Item:
RGB Range: Auto
The RGB Range setting requires appropriate HDMI
devices. If your HDMI
the TV may not work properly when it is enabled.
Using the HDMI® RGB Range feature
®
CEC Control and all items in the
CEC Control Setup menu are set to On, the following
Description:
®
If a HDMI CEC device is turned on, the TV turns on automatically.
If the TV is turned off, it will send a message to turn off all of the
®
HDMI CEC devices connected to the TV.
If Amplifier Control is set to On, you can adjust the sound volume or
turn off the sound using the remote control.
speakers or the amplifier. When this item is set to Amplifier, the remote
control can be used to adjust or mute the volume of the audio. This
item will not be available and set to TV Speakers automatically unless
®
a HDMI CEC compatible audio receiver is connected.
When you turn on the amplifier, change its input source, or adjust the
sound volume, the sound will be output from the amplifier's speakers
even if TV Speakers has been selected. Turn the TV off and on again
to output the sound from the TV speakers.
®
RGB Range feature
Description:
Adjusts the RGB full range signal automatically. When Limited is
selected, the RGB output signal is output in the range of 16 to 235.
When Full is selected, the RGB output signal is output in the range of 0
to 255.
®
source device does not support this feature,
Basic features
®
source
101