Toshiba 55L7400U User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. LED TV
  5. 55L7400U
  6. User manual

Toshiba 55L7400U User Manual

Integrated high definition led television
Hide thumbs Also See for 55L7400U:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual
Integrated High Definition LED
Television User's Guide:
55L7400U
If you need assistance:
Toshiba's Support Web site
For more information, see
Owner's Record
The model number and serial number are on the back and side of your television.
Print out this page and write these numbers in the spaces below. Refer to these
numbers whenever you communicate with your Toshiba dealer about this Television.
Model name:
Serial number:
Register your Toshiba Television at register.toshiba.com
Note: To display a High Definition
picture, the TV must be receiving a
High Definition signal (such as an over-
the-air High Definition TV broadcast, a
High Definition digital cable program,
or a High Definition digital satellite
program). For details, contact your TV
antenna installer, cable provider, or
satellite provider.
support.toshiba.com
"Troubleshooting" on page 161
in this guide.
GMA300036011
4/14

Advertisement

Table of Contents
loading

Related Manuals for Toshiba 55L7400U

Summary of Contents for Toshiba 55L7400U

  • Page 1 The model number and serial number are on the back and side of your television. Print out this page and write these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this Television. Model name: Serial number: Register your Toshiba Television at register.toshiba.com...

  • Page 2: Child Safety

    CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS TOSHIBA CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.

  • Page 3: Safety Precautions

    Dear Customer, NOTE TO CATV INSTALLERS Thank you for purchasing this Toshiba LED TV. This is a reminder to call the CATV system installer’s This document will help you use the many exciting attention to Article 820-40 of the U.S. NEC, which features of your new LED TV.
  • Page 4 Installation, Care, and Service Additional Safety Precautions Installation 14a) CAUTION: If the TV is dropped and the cabinet or enclosure surface has been damaged or the Follow these recommendations and precautions and TV does not operate normally, take the following heed all warnings when installing your TV: precautions: WARNING: NEVER expose batteries...
  • Page 5 Care Mounting screw For better performance and safer operation of your TOSHIBA TV, follow these recommendations and Fall-prevention band precautions: 27) The apparatus shall not be exposed to dripping or 35) If you use the TV in a room whose temperature is splashing, and that no objects filled with liquids, 32°...

  • Page 6: Choosing Location For Led Tv

    26) on If these sounds become frequent or continuous, page 4 for additional details. unplug the power cord and contact a Toshiba Authorized Service Provider. To Display your LED TV using a Wall Bracket: WARNING: RISK OF SERIOUS If you decide to wall mount your LED TV, always use...
  • Page 7 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and To ensure protection of your personal data, Toshiba recommends that you reset all TV settings when receiver. you recycle your TV or transfer to others. To reset • Connect the equipment into an outlet on a circuit...
  • Page 8 AVC PATENT PORTFOLIO LICENSE FOR THE Sonic Separation, TheaterWide, and TosLink are PERSONAL AND NONCOMMERCIAL USE trademarks or registered trademarks of Toshiba OF A CONSUMER TO (i) ENCODE VIDEO IN America Information Systems, Inc., and/or Toshiba COMPLIANCE WITH THE AVC STANDARD Corporation.
  • Page 9 Copyright © 2014 by Toshiba America Information Systems, Inc. All rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.

  • Page 10: Table Of Contents

    Contents Chapter 1: Introduction ...........18 Safety icons ............... 18 Features ..............19 Overview of installation, setup, and use ....20 TV front and side panel controls and connections ..22 Front panel ............22 Left side ............... 22 TV back panel controls and connections ....23 Back panel controls ..........
  • Page 11 Contents Connecting an antenna, satellite receiver, and/or cable TV box ..............28 Connecting a Blu-ray™/DVD player with ColorStream™ or a VCR with composite video ... 30 Connecting remote IR devices ........31 Using the IR blaster OUT terminal ....... 31 Connecting a digital audio system ......
  • Page 12 Contents Chapter 5: Setting up your TV .........63 How to navigate the menu ......... 63 Changing initial settings ........63 Individual settings ..........63 Storing channels in memory (optional) ....65 Skipping channels ..........66 Skipping video inputs .......... 67 Labeling analog TV channels .......
  • Page 13 Contents ® HDMI CEC Control input source selection ..82 Adjusting the amplifier’s audio ......83 ® Other HDMI CEC Control functions ....84 ® signal information ...... 84 Viewing the HDMI Using your computer with the TV ......85 Adjusting the image ..........
  • Page 14 Contents Setting the expert picture settings ......105 Test Pattern ............105 RGB Filter ............105 White Balance ............ 106 Adjusting the audio ..........107 Muting the sound ..........107 Selecting stereo/SAP broadcasts ....... 107 Selecting the TV Mounting (Wall/Stand) .... 107 Selecting the Sound Mode .........
  • Page 15 Contents Using the Flip Bar features ........130 Setting up the Flip Bar ........130 Selecting programs using the Flip Bar ....132 Changing the Flip Bar settings ......133 Resetting the Flip Bar settings ......134 Using the Cloud Service .......... 135 Using the Cloud Portal Service features ....
  • Page 16 Contents ® HDMI problems ............. 166 Network problems ........... 166 Wireless network problems ........168 MediaShare problems ..........168 Cloud Portal ............169 Light Indicator ............169 Power On/Standby light .......... 169 If the problem persists after trying the solutions..169 Appendix A: Specifications ..........170 Television system ............
  • Page 17 Contents Appendix B: External Keyboard Layout......176 International Key table ........179 Index ................180...

  • Page 18: Chapter 1: Introduction

    Chapter 1 Introduction Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

  • Page 19: Features

    Introduction Features Features Integrated digital tuning (8VSB ATSC and QAM) — ❖ Eliminates the need for a separate digital converter set-top box (in most cases). 1920 x 1080 display resolution. ❖ ® Four HDMI —Digital, High-Definition Multimedia Interfaces with ❖ 1080p input support. ® HDMI capabilities ARC (Audio Return Channel)—Enables the ❖...

  • Page 20: Overview Of Installation, Setup, And Use

    ❖ allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA LIMITED WARRANTY. Do not plug in any power cords until after you have connected all cables and devices to your TV.
  • Page 21 Introduction Overview of installation, setup, and use Before connecting cables or devices to the TV, review the functions of the TV’s connections and controls, see “Overview of cable types” on page Connect your other electronic device(s) to the TV, see “Connecting Your TV”...

  • Page 22: Tv Front And Side Panel Controls And Connections

    Introduction TV front and side panel controls and connections TV front and side panel controls and connections 2 USB ports ARC HDMI ® 3 HDMI ports ® only port 1 Digital Audio jack Remote sensor Ambient light sensor Power LED (Sample Illustration) L7400U Series front and side panel controls and connections Front panel...

  • Page 23: Tv Back Panel Controls And Connections

    Introduction TV back panel controls and connections TV back panel controls and connections POWER button Volume up Volume down Switches the function of VOL+/- buttons to select volume, channel or input mode. Analog Audio OUT COLOR STREAM HD / VIDEO2 IN HDMI IN ANALOG AUDIO OUT...

  • Page 24: Back Panel Connections

    Introduction TV back panel controls and connections In Source mode, the arrow buttons toggle the input from one ❖ source to the next. The mode of the VOL +/– buttons change in the following order each time the button is pressed: → Channel → Input → Volume →...

  • Page 25: Chapter 2: Connecting Your Tv

    Chapter 2 Connecting Your TV Overview of cable types Before purchasing cables, know the connector types your devices require. You can purchase cables from most stores that sell audio/video devices. Coaxial cable (F-type) (Sample Illustration) Coaxial cable Coaxial (F-type) cable connects your antenna, cable TV service, and/or cable converter box to the ANT/CABLE input on your TV.

  • Page 26: Component Video Cables (Red/Green/Blue)

    Component video cables come in sets of three and are for use with video ™ devices with component video output. (ColorStream is Toshiba’s brand of component video.) These cables are typically color-coded red, green, and blue. Separate audio cables are required for a complete connection.

  • Page 27: Optical Audio Cable

    Connecting Your TV Overview of cable types Optical audio cable (Sample Illustration) Optical audio cable ® ® Optical audio cable connects receivers with Dolby Digital, DTS PCM (pulse-code modulation) optical audio input to the TV’s Digital Audio Out terminal, see “Connecting a digital audio system”...

  • Page 28: Lan Cable

    Connecting Your TV Connecting an antenna, satellite receiver, and cable TV box LAN cable (Sample Illustration) LAN cable Standard LAN cable connects the TV to your home network, see “Connecting the TV to a home network with an Internet connection - wired”...
  • Page 29 Connecting Your TV Connecting an antenna, satellite receiver, and cable TV box Items needed: Coaxial cables ❖ Standard AV cables ❖ Component video cables (red/green/blue) ❖ NOTE When you use a cable box, you may not be able to use the remote control to program or access certain features on the TV.

  • Page 30: Connecting A Blu-Ray™/Dvd Player With Colorstream™ Or A Vcr With Composite Video

    Connecting Your TV Connecting a Blu-ray™/DVD player with ColorStream™ or a VCR with composite video Connecting a Blu-ray™/DVD player with ColorStream™ or a VCR with composite video Connecting a Blu-ray™/DVD player with ColorStream™ video ❖ TV back panel COLOR STREAM HD / VIDEO 2 IN Y / VIDEO Blu-ray™/DVD player...

  • Page 31: Connecting Remote Ir Devices

    Connecting Your TV Connecting remote IR devices NOTE When you use ColorStream™ HD or Video, please switch to the appropriate AV mode. To view antenna or Cable channels: Select the ANT/CABLE video input source on the TV.* To view the Blu-ray™/DVD player: Turn ON the Blu-ray™/DVD player.
  • Page 32 Connecting Your TV Connecting remote IR devices To connect the IR blaster cable: Locate the infrared sensor on the front of your device. This sensor is marked on some devices. If you are having issues locating the device's infrared sensor, see “If you cannot locate the device’s infrared sensor:”...
  • Page 33 Connecting Your TV Connecting remote IR devices To control the device(s): Point the TV remote control toward the front of the TV and press the button for the desired function. The signal passes from the remote control through the TV to the device via the IR Blaster cable. For more information, see “Setting the IR Blaster”...

  • Page 34: Connecting A Digital Audio System

    Connecting Your TV Connecting a digital audio system Connecting a digital audio system ® ® The TV’s Digital Audio Out terminal outputs a Dolby Digital, DTS 2-channel down-mixed PCM (pulse-code modulation) signal for using ® ® with an external Dolby Digital and/or DTS decoder, or other external audio systems with optical audio input.

  • Page 35: Connecting An Hdmi ® Device

    Connecting Your TV ® Connecting an HDMI device ® Connecting an HDMI device ® The HDMI input on your TV receives digital audio and uncompressed ® digital video from an HDMI source device. This input is designed to accept HDCP (High- Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D–...

  • Page 36: Using The Tv Remote And Hdmi ® Cec Control To Control Other Devices

    Connecting Your TV ® Using the TV remote and HDMI CEC Control to control other devices NOTE ® To ensure that the HDMI device is reset properly: When turning on your electronic components, turn on the TV first, and ❖ ®...

  • Page 37: Connecting An Hdmi ® Audio System

    NOTE ® This feature is limited to models incorporating Toshiba’s HDMI Control feature. However, Toshiba is not liable for those operations. See the individual instruction manuals for compatibility information. When using an external AV amplifier the picture and sound may not be properly synchronized. In this case, adjust the delay time of the sound on the AV amplifier.

  • Page 38: Connecting A Computer

    Connecting Your TV Connecting a computer ® HDMI ARC (Audio Return Channel) feature This feature enables the audio signal of the TV to be sent to an audio system ® via the HDMI cable. It will not be necessary to connect a cable from the audio output of the TV to the audio input of the audio system to reproduce the audio received from the tuner of the TV through the audio system.

  • Page 39: Connect A Computer To The Tv's Hdmi

    Connecting Your TV Connecting a computer “Using your computer with the TV” on page NOTE Some computer models cannot be connected to this TV. ❖ If the computer has a compatible mini D-sub15-pin terminal, an ❖ adapter is not required. Depending on the content’s title and the computer’s specifications, ❖...

  • Page 40: Connecting To A Home Network

    (i.e. no overscanning). Connecting to a home network The LAN port allows your Toshiba TV to connect to your home network. You can use this home network to access photos, movies, and music files that are stored on a connected media server and play them on your TV.

  • Page 41: Connecting The Tv To A Home Network Without An Internet Connection

    Connecting Your TV Connecting to a home network Connecting the TV to a home network without an Internet connection Items needed: Standard LAN cables ❖ Router with a hub ❖ Router with a hub Computer TV back panel Computer (Sample Illustration) L7400U Series—Connecting a network without Internet connection...

  • Page 42: Connecting The Tv To A Home Network With An Internet Connection - Wired

    Connecting Your TV Connecting to a home network Connecting the TV to a home network with an Internet connection - wired Items needed: Coaxial or telephone cable (depending on your modem type) ❖ Standard LAN cables ❖ Router with Hub ❖...
  • Page 43 Connecting Your TV Connecting to a home network Modem (DSL or cable) ❖ Modem (DSL or cable) Wireless LAN access point Built-in WLAN system: Cable or It is not nessesary to connect an Phone jack external WLAN adaptor to the TV Computer (Sample Illustration) L7400U Series—Connecting with Internet connection - wireless...

  • Page 44: Chapter 3: Using The Remote Control

    Chapter 3 Using the Remote Control Controlling other devices The TV’s remote control can operate other devices as described in “Setting the IR Blaster” on page Installing batteries To install batteries: Slide back and pull up to open the cover. (Sample Illustration) Removing the battery cover...

  • Page 45: Installing Batteries

    Using the Remote Control Installing batteries Install two AAA size batteries. NOTE Use carbon zinc batteries or alkaline batteries. (Sample Illustration) installing the batteries Slide on the cover. Do not expose batteries to excessive heat such as sunshine, fire, etc. NOTE Dispose of batteries in a designated disposal area.

  • Page 46: Remote Control Effective Range

    Using the Remote Control Remote control effective range Remote control effective range For optimum performance, aim the remote control directly at the TV and make sure there are no obstructions between the remote control and the TV. 16.4 ft (5m) (Sample Illustration) Remote control effective range...

  • Page 47: Learning About The Remote Control

    Using the Remote Control Learning about the remote control Learning about the remote control Only the buttons used to operate the TV are described in this section. ® ® For the HDMI CEC Control functions, see “Using HDMI Control” on page (Sample Illustration) Remote control overview...
  • Page 48 Using the Remote Control Learning about the remote control NOTE The error message “Not Available” may appear if you press a button for a function that is not available. Item: Description: Function: Item: Description: Function: POWER button Turns the TV On and Off. When QUICK button Launches the Quick menu.

  • Page 49: Chapter 4: Initial Setup And Menu

    Chapter 4 Initial Setup and Menu Initial setup When you first turn on or reset the TV, the Menu Language screen appears. NOTE You can stop initial setup by pressing the EXIT button. However, if you ❖ do not finish Channel Tuning setting, the Quick Setup screen will appear every time you turn on your TV. The EXIT button does not work until after you have set the Store/ ❖...

  • Page 50: Performing The Initial Setup

    ) appears by them. The setup window shows the settings. ❖ Setup window Progress window Quick Setup Country Welcome Country Thank you for choosing Toshiba TV Time Zone Store/Home Mode U.S. Network Canada Mexico Smart TV Channel Tuning Previous Next...
  • Page 51 Initial Setup and Menu Performing the initial setup Basic Operations in Quick Setup Use the p / q (arrow) buttons to select an item on the setup window, and press the OK button. Select Next and press the OK button. The next item will appear.
  • Page 52 Initial Setup and Menu Performing the initial setup Performing the Quick Setup Country Select a country then press the OK button. Time Zone Select Time Zone, and select a time zone from the submenu. Select Daylight Saving Time, and select On or Off from the submenu.
  • Page 53 Initial Setup and Menu Performing the initial setup Select Wireless Setup, and select Easy Setup, Assisted Setup, or Manual Setup from the sub menu. Select Next. NOTE Easy Setup. If your Access Point (AP) supports Wi-Fi Protected ❖ Setup, this method can be used. Wi-Fi Protected Setup is a standard designed to simplify the connection of wireless LAN equipment and the setup of network security features.
  • Page 54 Initial Setup and Menu Performing the initial setup Smart TV Power Management Select Active Standby Mode, and select On or Off. When Active Standby Mode is turned On, screens such as the Menu screen and Internet screen appear more quickly than usual when the power is turned on from standby.
  • Page 55 Initial Setup and Menu Performing the initial setup After scanning is complete, the auto tuning results screen (such as the one below) will appear. Auto Tuning (Antenna) Antenna Channels Found: 13 Type RF Ch. 101 - 201 101 - 201 101 - 201 101 - 201 (Sample Illustration) Auto Tuning Results screen...
  • Page 56 Initial Setup and Menu Performing the initial setup IR Blaster Select Next or Skip. To start the IR Blaster setup, select Next on the screen, or to ❖ skip the setup, select Skip. If you skip this setup, you can setup the IR Blaster at any time through the Installation >...
  • Page 57 Initial Setup and Menu Performing the initial setup Model Name Press the GREEN button. The Model Name screen will appear. Use the p / q (arrow) buttons to select the model name then press the OK button. Select a field and press the OK button to show the ❖...
  • Page 58 Initial Setup and Menu Performing the initial setup HDMI 1 ❖ HDMI 2 ❖ HDMI 3 ❖ HDMI 4 ❖ ❖ Press the q (arrow) button. Use the t / u (arrow) buttons to select device mode key. CABLE/SAT ❖ BD/DVD ❖...
  • Page 59 Initial Setup and Menu Performing the initial setup Press the q (arrow) button to select Interval Time. 0.125 sec ❖ 0.25 sec ❖ 0.375 sec ❖ 0.5 sec ❖ 0.625 sec ❖ 0.75 sec ❖ 0.875 sec ❖ 1 sec ❖...
  • Page 60 Initial Setup and Menu Performing the initial setup Bar Wizard and select this channel each time the TV is turned on. If time information is not being received correctly, records of ❖ previously watched channels may not be stored properly. The records of previously watched channels may be erased.

  • Page 61: Navigating The Menu System

    Initial Setup and Menu Navigating the menu system 5 When you have finished setting channels, press the GREEN button. The current time screen appears. Select Next and press the OK button. If you are not connected to a network, select a channel to obtain time information. Select Done and press the OK button. Support Information Read through the information, and press the OK button.

  • Page 62: Quick Menu

    Initial Setup and Menu Quick Menu All menus close automatically if no selection is made within ❖ approximately 60 seconds. To close a menu instantly, press the EXIT button. ❖ Quick Menu Quick menu helps you access some options more quickly. Press the QUICK button to display the Quick menu and press the p / q (arrow) buttons to select an option.

  • Page 63: Chapter 5: Setting Up Your Tv

    Chapter 5 Setting up your TV How to navigate the menu Press the MENU button. Select Installation, Main menu, Submenu, ❖ and then press the OK or EXIT button. Changing initial settings From Quick Setup: Press the MENU button. Select Installation > Quick Setup, and press the OK button. A confirmation message appears.

  • Page 64: Time Zone

    Setting up your TV Individual settings Country You can select the country in which you reside. Press the MENU button. Select Installation > Country and press the OK button. Press the p / q (arrow) buttons to select the country. Press the OK button.

  • Page 65: Storing Channels In Memory (Optional)

    Setting up your TV Storing channels in memory (optional) Press the p / q (arrow) buttons to select Antenna or Cable. Press the OK button. Storing channels in memory (optional) To make sure your TV stops only on the channels you want when you press the CH p / q buttons on the remote control or the control panel, store those channels in the TV’s memory.

  • Page 66: Skipping Channels

    Setting up your TV Skipping channels Manual Tuning After storing channels in memory, you can manually enter channels if the channel number is known. Press the MENU button. Select Installation > Channel Tuning > Manual Tuning, and then press the OK button. Use buttons 0–9 on the remote control to enter the channel number (for example, 56).

  • Page 67: Skipping Video Inputs

    Setting up your TV Skipping video inputs NOTE You cannot tune skipped channels using the CH buttons. Use buttons 0–9 and the DASH button on the remote control. Skipping video inputs You can set video inputs to be skipped when selecting inputs in the Input selection screen.

  • Page 68: Labeling Video Inputs

    Setting up your TV Labeling video inputs Labeling video inputs The input labels are shown in the input selector and banner displays. You can label video inputs according to the devices you have connected to the Press the MENU button. Select Options >...

  • Page 69: Chapter 6: Basic Features

    Chapter 6 Basic features Tuning Channels Tuning to the next programmed channel Press the CH p / q buttons on the remote control or TV control panel. Tuning to a specific channel (programmed or unprogrammed) Channel: Description: Analog Use the 0–9 buttons on the remote control. (For example, to select channel 125, press 1, 2, 5.), and then press the OK button.

  • Page 70: Selecting The Video Input To View

    Basic features Selecting the video input to view Selecting the video input to view To select the video input to view: Press the INPUT button. Change the input: Press 0–7. ❖ Repeatedly press the p / q (arrow) buttons and then press the ❖...

  • Page 71: Using Closed Captions

    Basic features Using closed captions Press the OK button. Using closed captions To turn on the closed caption mode: Press the MENU button. Select Options > Closed Captions. Press the OK button. Press the p / q (arrow) buttons to select Closed Captions Display and press the OK button.

  • Page 72: Digital Cc Settings

    Basic features Using closed captions NOTE If the program or video you have selected is not closed captioned, no captions will be displayed. To view text: Press the p / q (arrow) buttons to highlight T1, T2, T3, or T4. WORLD WEATHER Temps Current...

  • Page 73: Setting The Pin Code

    Basic features Using closed captions To customize the closed captions: Press the MENU button. Select Options > Closed Captions. Press the OK button. Press the p / q (arrow) buttons to select Digital CC Settings and then press the OK button. Press the p / q (arrow) buttons to select a characteristic and then press the OK button.

  • Page 74: Changing Or Deleting Your Pin Code

    Basic features Using closed captions Changing or deleting your PIN code Press the MENU button. Select Options > Parental PIN Setup. Press the OK button. Use the number buttons to enter your 4-digit PIN code. Select Change PIN or Delete PIN, and then press the OK button. NOTE The PIN code cannot be set to “0000”.

  • Page 75: Using Parental Controls

    Basic features Using parental controls Using parental controls Blocking TV programs and movies by rating (V-Chip) Some TV programs and movies include signals that classify the content of the program (as unsuitable for younger viewers). The V-Chip feature in this TV detects the signals and blocks the programs according to the ratings you select.
  • Page 76 The additional rating system is not designed, transmitted, or controlled ❖ by the TV or Toshiba, nor is the availability of an additional rating system determined or controlled by Toshiba. Similarly, the rating of programs in an additional rating system is not determined, transmitted, or controlled by the TV or Toshiba.

  • Page 77: Rating System

    Basic features Using parental controls Rating system Independent rating system for broadcasters: Ratings: Description and Content themes: TV-MA Mature Audience Only (This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17. L) Crude or indecent language S) Explicit sexual activity V) Graphic violence TV-14 Parents Strongly Cautioned (This program contains some material that...

  • Page 78: Displaying Ratings

    Basic features Locking specific channels Displaying ratings To display the rating of the program you are watching, press the INFO button on the remote control. Unlocking programs If you try to tune to a program that exceeds the rating limits you have set, the TV will enter program lock mode and a warning message will appear on screen.

  • Page 79: Locking Video Inputs

    Basic features Locking specific channels Locking video inputs You can lock video inputs. You cannot view the input sources until you unlock the inputs by entering the PIN code. Press the MENU button. Select Options > Parental Control and Locks. Press the OK button. Enter your 4-digit PIN code.

  • Page 80: Locking The Control Panel

    To unlock the control panel: Select Off in Step 3 above. ❖ ® Using HDMI CEC Control This feature uses CEC technology and allows you to control Toshiba ® ® HDMI CEC compatible devices from the TV remote control via HDMI connection.

  • Page 81: Controlling Hdmi ® Cec Playback Devices

    Basic features ® Using HDMI CEC Control Press the p / q (arrow) buttons to select an item and press the OK button. Press the p / q (arrow) buttons to select On or the desired mode: TV Auto Power: On/Off ❖...

  • Page 82: Hdmi ® Cec Control Input Source Selection

    Basic features ® Using HDMI CEC Control ® HDMI CEC Player Control menu functions Press the QUICK button to open the Quick menu. Select HDMI CEC Device Control, and then press the OK button. Press the p / q (arrow) buttons to select the item you want to control, and then press the OK button.

  • Page 83: Adjusting The Amplifier's Audio

    Basic features ® Using HDMI CEC Control Adjusting the amplifier’s audio Using the TV’s remote control, you can adjust or mute the sound volume of your audio system. The VOL (+ -) buttons adjust the volume level. ❖ The MUTE button turns off the sound. ❖...

  • Page 84: Other Hdmi ® Cec Control Functions

    Basic features ® Viewing the HDMI signal information ® Other HDMI CEC Control functions ® When Enable HDMI CEC Control and all items in the HDMI Control Setup menu are set to On, the following functions will be enabled: Item: Description: ®...

  • Page 85: Using Your Computer With The Tv

    Basic features Using your computer with the TV Using your computer with the TV Adjusting the image If the edges of the picture are hidden, readjust Horizontal Position and Vertical Position. If the picture is affected by interference, readjust Clock Phase and Sampling Clock.

  • Page 86: Setting The Timer To Turn On The Tv

    Basic features Setting the timer to turn on the TV Setting the timer to turn on the TV You can set the on timer to turn on the TV to a preset channel or input at a preset time. To activate the timer: Press the MENU button.

  • Page 87: Setting The Sleep Timer

    Basic features Setting the sleep timer To cancel the timer: Press the MENU button. Select Timers > On Timer. Press the OK button. Press the p / q (arrow) buttons to select Enable On Timer. Press the t / u (arrow) buttons to select Off. Setting the sleep timer You can set the TV to turn off after a specific amount of time (maximum = 12 hours).

  • Page 88: Setting No Signal Power Down

    Basic features Setting No Signal Power Down Setting No Signal Power Down When an input's setting in this feature is set to On, The TV will automatically turn itself off after about 15 minutes if no signal is detected. You can change each input's setting to Off: ANT/CABLE or External Inputs.

  • Page 89: Setting Wake On Lan Standby Mode

    Basic features Setting Wake on LAN Standby Mode Setting Wake on LAN Standby Mode When the TV is connected to the home network via LAN with the Wake on LAN Standby Mode On, your TV can be turned on by control from Apps.

  • Page 90: Displaying Tv Status Information

    Basic features Displaying TV status information Displaying TV status information To display TV status information, press the INFO button. The following information will be displayed (if applicable): Current input (ANT/CABLE, Video, etc.) ❖ Either “CABLE” (for cable TV) or “ANT” (for over-the-air ❖...

  • Page 91: Resetting To Factory Defaults

    Basic features Resetting to Factory Defaults Resetting to Factory Defaults You can reset all settings and channels to Factory Defaults. Press the MENU button. Select Installation > Reset TV. Enter your PIN code (if a PIN code has been set). A confirmation screen appears.

  • Page 92: Chapter 7: Picture And Sound Controls

    Chapter 7 Picture and Sound Controls Selecting the picture size You can view many program formats in several picture sizes— Native Mode™, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3, Normal, and Dot by Dot. NOTE The picture size illustrations are examples only. The format of the ❖...
  • Page 93 Picture and Sound Controls Selecting the picture size You can save separate picture size preferences for each input on your TV. To select the picture size using the Quick menu: Press the QUICK button to open the Quick menu. Select Picture Size, and then press the OK button. Press the p / q (arrow) buttons to select the Picture Size.
  • Page 94 Picture and Sound Controls Selecting the picture size (Sample Illustration) Picture size - 4:3 Some program formats will display with sidebars and/or bars at the top and bottom. Full This setting is for viewing in the 16:9 (480i, 480p) source programs only. (Sample Illustration) Picture size - Full 16:9 If receiving a squeezed 4:3 format program, the picture is stretched horizontally to fill the width of the screen but not stretched vertically.
  • Page 95 Picture and Sound Controls Selecting the picture size TheaterWide 1 This setting is for viewing in 4:3 format programs. (Sample Illustration) Picture size - TheaterWide 1 The center of the picture remains close to its original proportions, but the left and right edges are stretched horizontally to fill the screen. TheaterWide 2 This setting is for viewing letter box programs.
  • Page 96 Picture and Sound Controls Selecting the picture size Normal This setting is for viewing SVGA, XGA, WXGA, and SXGA sources. (Sample Illustration) Picture size - Normal This size is a non-stretched display. Some input signal formats will display with sidebars and/or bars at the top and bottom. Dot by Dot This setting is for viewing SVGA, XGA, WXGA, and SXGA sources.

  • Page 97: Scrolling The Picture

    Picture and Sound Controls Scrolling the picture Scrolling the picture If the edges of the picture are hidden, you can adjust the image’s position. NOTE You can adjust the picture position when the picture size is set to ❖ TheaterWide 2 or TheaterWide 3. When viewing Cloud Portal, MediaShare or Internet content, this ❖...

  • Page 98: Using The 4:3 Stretch

    Picture and Sound Controls Using the 4:3 Stretch Using the 4:3 Stretch When 4:3 Stretch is activated, the TV displays 4:3 programs as a full- screen picture. NOTE This feature is available when Auto Aspect is set to On. Press the MENU button. Select Picture >...

  • Page 99: Adjusting The Picture Quality

    Picture and Sound Controls Adjusting the picture Press the EXIT button. The picture mode can also be changed by pressing the PIC MODE ❖ button on the remote control. NOTE The picture mode you select affects the current input only. You can select a different picture mode for each input.

  • Page 100: Using The Advanced Picture Settings Features

    Picture and Sound Controls Using the advanced picture settings features To reset to the factory defaults: Press the MENU button. Select Picture > Reset. Press the OK button. A confirmation screen appears. Press the t / u (arrow) buttons to select Yes, and then press OK. Using the advanced picture settings features Edge Enhancer If the Edge Enhancer set to On, the clarity levels can be adjusted...

  • Page 101: Dynalight

    Picture and Sound Controls Using the advanced picture settings features DynaLight™ The DynaLight™ dynamic backlight control monitors the brightness of each video frame and automatically adjusts backlight intensity based on the content to create higher dynamic contrast, for deeper blacks and increased depth.

  • Page 102: Mpeg Nr

    Picture and Sound Controls Using the advanced picture settings features MPEG NR The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Press the MENU button. Select Picture > Advanced Picture Settings > Noise Reduction and press the OK button.

  • Page 103: Ambient Light Sensor

    Picture and Sound Controls Using the advanced picture settings features Ambient Light Sensor When the ambient light function of Auto Brightness Sensor is set to On, the TV optimizes the backlighting levels to suit ambient light conditions. Press the MENU button. Select Picture >...

  • Page 104: Color Temperature

    Picture and Sound Controls Using the advanced picture settings features Color Temperature Press the MENU button. Select Picture > Advanced Picture Settings > Color Temperature and press the OK button. Select Color Temperature and press the OK button. Press the p / q (arrow) buttons to select Cool, Medium, or Warm.

  • Page 105: Setting The Expert Picture Settings

    Picture and Sound Controls Setting the expert picture settings Setting the expert picture settings NOTE This feature is only available in Standard and Movie mode. Test Pattern When the test pattern is on screen, you can navigate the Picture submenus without removing the image.

  • Page 106: White Balance

    Picture and Sound Controls Setting the expert picture settings White Balance Window Display This feature displays the Window Pattern to adjust the white balance. Press the MENU button. Select Picture > Expert Picture Settings > White Balance and press the OK button. Press the p / q (arrow) buttons to select Window Display and press the OK button.

  • Page 107: Adjusting The Audio

    Picture and Sound Controls Adjusting the audio Adjusting the audio Muting the sound Press the MUTE button to partially reduce (1/2 Mute) or turn off (Mute) the sound. Each time you press the MUTE button, the mute mode changes in the following order: 1/2 Mute, Mute, Volume, 1/2 Mute, etc. NOTE If you modify items in the Sound menu while Mute is active, Mute is cancelled.

  • Page 108: Selecting The Sound Mode

    Picture and Sound Controls Adjusting the audio Selecting the Sound Mode You can select your desired Sound Mode from the modes described below. Mode: Description: Standard Standard sound settings Music Ideal for music programs. Movie Ideal for watching movies. Clear Voice This setting makes dialog easier to hear.

  • Page 109: Adjusting The Audio Balance

    Please note that any unlawful use, including public and/or commercial use, could lead to copyright infringement of the holder's rights. Toshiba asks you to respect the intellectual property rights of third parties. The effect of Sonic Separation depends on the content used.

  • Page 110: Adjusting The Range

    Picture and Sound Controls Adjusting the audio Adjusting the range Use the Sound Equalizer to adjust the sound quality to your liking. Press the MENU button. Select Sound > Advanced Sound Settings > Sound Equalizer and press the OK button. Press the t / u (arrow) buttons to select a frequency band, and press the p / q (arrow) buttons to adjust the level for that band.

  • Page 111: Truvolume

    Picture and Sound Controls Adjusting the audio TruVolume™ Use the TruVolume™ feature to maintain a volume, despite volume spikes or changes in content sources. Press the MENU button. Select Sound > TruVolume and press the OK button. Press the p / q (arrow) buttons to select On or Off. Press the EXIT button.
  • Page 112 Picture and Sound Controls Adjusting the audio Press the p / q (arrow) buttons to select Auto or PCM. Press the EXIT button. Audio Delay Press the MENU button. Select Sound > Digital Audio Output > Audio Delay and press the OK button.

  • Page 113: Selecting The Analog Audio Output Format

    Picture and Sound Controls Adjusting the audio Selecting the analog audio output format Set the type of analog audio that is output from the ANALOG AUDIO OUT terminal. Press the MENU button. Select Sound > Analog Audio Output and press the OK button. Press the p / q (arrow) buttons to select Fixed or Variable.

  • Page 114: Chapter 8: Advanced Features

    Some features may require an always-on broadband Internet ❖ connection, firmware update, and/or additional bandwidth. Third party Internet services are not provided by Toshiba, may ❖ change or be discontinued at any time, and may be subject to third party restrictions. Toshiba makes no warranties, representations, or assurances about the content, availability, or functionality of third party content or services.

  • Page 115: When Using A Wireless Network Connection

    LAN devices is much less than the electromagnetic energy emitted by wireless devices like mobile phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, Toshiba believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

  • Page 116: Setting Up The Network

    LAN is not securely protected. Unauthorized users may access your data and network without appropriate security measures. Selecting an encryption setting from your Toshiba TV and using a secure network for wireless LAN transmissions may help avoid unauthorized access to your important data and/or TV. Toshiba disclaims any and all responsibility or liability resulting from any wireless transmissions over the Internet through your Toshiba TV.
  • Page 117 Advanced features Setting up the Network Easy Setup using PBC (Push button configuration) Press the MENU button. Select Network > Network Setup > Wireless Setup and press the OK button Press the p / q (arrow) buttons to select Easy Setup and press the OK button.
  • Page 118 Advanced features Setting up the Network To cancel searching for the AP: Press the BACK button while searching for the AP. A message ❖ appears. Press the t / u (arrow) buttons to select Yes, and then press the OK button. Assisted Setup Press the MENU button.
  • Page 119 Advanced features Setting up the Network Manual Setup Press the MENU button. Select Network > Network Setup > Wireless Setup and press the OK button. Press the p / q (arrow) buttons to select Manual Setup, and then press the OK button. Press the p / q (arrow) buttons to select Network Name, and then press the OK button.
  • Page 120 Advanced features Setting up the Network The Software Keyboard window appears. Input the Security Key using the Software Keyboard. For more information, see “Using the software keyboard” on page 125. To save your settings, press the GREEN button. NOTE This item is grayed out when Encryption is set to None. Select Done, and then press the OK button.

  • Page 121: Advanced Network Setup

    Advanced features Setting up the Network DHCP The message, “Enabled” appears when you use DHCP. The message, “Disabled” appears when you do not use DHCP. IP Address The TV’s IP address Subnet Mask Value of the Subnet Mask Default Gateway Default GATEWAY’s address DNS’s address NOTE...

  • Page 122: Dns Setup

    Advanced features Setting up the Network Press the p / q (arrow) buttons to select IP Address Setup, and then press the OK button. Press the p / q (arrow) buttons to select Auto Setup and press the OK button. Press the p / q (arrow) buttons to select Off.
  • Page 123 Advanced features Setting up the Network Press the p / q (arrow) buttons to select Auto Setup and press the OK button. Press the p / q (arrow) buttons to select On. NOTE Other items are grayed out when Auto Setup is set to On. Manual setup: Press the MENU button.

  • Page 124: Network Connection Test

    Advanced features Setting up the Network Network Connection Test This function checks Internet connectivity. Press the MENU button. Select Network > Network Setup > Network Connection Test, and then press the OK button. A message appears to indicate whether the connection was successful or not.

  • Page 125: Using The Software Keyboard

    Advanced features Using the software keyboard Using the software keyboard You can enter text using the Software Keyboard. The Software Keyboard window will appear when you press the OK button on a field that accepts character input. NOTE When using the SmartTV features, software keyboard availability ❖ depends on the Internet service being accessed.

  • Page 126: Enter Text Using The Software Keyboard

    Advanced features Using the software keyboard Enter text using the software keyboard Highlight the desired character on the on-screen software keyboard. Press the OK button. Repeat Step 1 and 2 until you have entered all desired text. Select Done or press the GREEN button to save your settings and return to the previous screen.

  • Page 127: Performing A Software Upgrade

    Advanced features Performing a Software Upgrade Performing a Software Upgrade TOSHIBA may offer upgrades for the TV's software in the future. The TV's software is upgraded via the Network. NOTE An Internet connection is required. Before downloading software: Configure your TV to connect to the Internet. NOTE You will not be able to use the TV set while performing the upgrade.

  • Page 128: Using Intel ® Widi / Wireless Display

    WiDi / wireless display ® ® Intel Wireless Display (Intel WiDi) is supported on this TV. Toshiba has also included peer-to-peer wireless technologies to allow direct wireless ® connection between the TV and Intel WiDi equipped PC or mobile ®...

  • Page 129: Changing The Intel ® Widi Device Name

    Advanced features ® Using Intel WiDi / wireless display WiDi software on the device or by pressing the EXIT button on the TV remote control. NOTE ® If the device has been inactive for some time, the Intel WiDi connection will be disconnected automatically.

  • Page 130: Using The Flip Bar Features

    Advanced features Using the Flip Bar features Using the Flip Bar features The Flip Bar function adds thumbnails of programs currently being broadcast for set channels, the channel being watched at the same time the previous day, or the channel being watched at the same time one week previously to the bottom of the screen, making it easy for you to choose a channel.
  • Page 131 Advanced features Using the Flip Bar features Select Next and press the OK button. Read the information on screen, and select Agree after confirming the contents. Then select Next and press the OK button. To set Favorite Channels, select Yes and press the OK button. Register a channel.

  • Page 132: Selecting Programs Using The Flip Bar

    Advanced features Using the Flip Bar features Selecting programs using the Flip Bar Display thumbnails on the bottom of the screen and select your desired program. Press the FLIP BAR ( ) button while watching TV broadcast or an external input. Thumbnails will be displayed at the bottom of the screen.

  • Page 133: Changing The Flip Bar Settings

    Advanced features Using the Flip Bar features Changing the Flip Bar settings Change the Favorite Channel contents or reset the previously watched channel information. Changing the Favorite Channel contents Press the MENU button. Select Options > Flip Bar Setup and press the OK button. Press the p / q (arrow) buttons to select Favorite Channels, and then press the OK button.

  • Page 134: Resetting The Flip Bar Settings

    Advanced features Using the Flip Bar features Last Week thumbnail display settings Press the MENU button. Select Options > Flip Bar Setup and press the OK button. Press the p / q (arrow) buttons to select Last Week. Press the t / u (arrow) buttons to select On or Off. If Off is selected, Last Week thumbnails will not be displayed.

  • Page 135: Using The Cloud Service

    Some features may require an always-on broadband Internet ❖ connection, firmware update, and/or additional bandwidth. Third party Internet services are not provided by Toshiba, may change ❖ or be discontinued at any time and may be subject to Internet service provider restrictions.

  • Page 136: Emanual

    Advanced features Using the Cloud Portal Service features NOTE If the display of the date and time is wrong, try to turn off the TV, and ❖ turn it on again. The menu items for features like the Apps may change in the upgrade ❖...
  • Page 137 Advanced features Using the Cloud Portal Service features ® To close Netflix , press the EXIT button. To confirm the Netflix ESN (Electronic Serial Number): Press the MENU button. Select Network > Smart Apps Setup > Netflix Setup and press the OK button. Press the p / q (arrow) buttons to select ESN, and then press the OK button.

  • Page 138: Internet

    Advanced features Using the Cloud Portal Service features Internet Open Web Browser The open web browser with HTML5 video and audio codecs which allow you to explore the web the way you want. Search for, bookmark, and browse your favorite sites to enjoy the content you want, with simple, intuitive navigation.

  • Page 139: Browsing Favorite Websites

    Advanced features Using the Cloud Portal Service features You can use a Wireless QWERTY keyboard in addition to the software ❖ keyboard (wireless keyboard not included). Browsing favorite websites Connect to the network. Press the button on the remote control to access the web browser page.
  • Page 140 Advanced features Using the Cloud Portal Service features Adding favorite websites Connect to the network. Press the button on the remote control to access the web browser page. Follow “Using the web browser” on page 138 to display your desired website. Press the Navigation buttons to scroll to Favorites STAR on the Browser Menu Bar and press the OK button.

  • Page 141: Mediashare (Videos, Music, And Photos)

    FAT16 and FAT32 (USB device) ❖ NOTE You must obtain any required permission from copyright owners to download or use copyrighted content. Toshiba cannot and does not grant such permission. Basic operation Using MediaShare with a USB device When Auto Start is enabled, you will be asked if you want to start the MediaShare whenever a USB device is inserted.

  • Page 142: Auto Start

    Advanced features Using the Cloud Portal Service features To change the List Mode setting Set the display mode on the list screen for the Videos, Music and Photos categories. Press the MENU button. Select Options > MediaShare Setup > List Mode and press the OK button.

  • Page 143: Manual Start

    Advanced features Using the Cloud Portal Service features Manual Start Insert a USB device into the USB port. Press the MEDIA SHARE button. To change the device, press the p / q / t / u (arrow) buttons to select the devices on the screen, and then press the OK button.
  • Page 144 Advanced features Using the Cloud Portal Service features Using MediaShare with a Media Server You need to configure a home network before using this feature, see “Setting up the Network” on page 116. Press the MEDIA SHARE button. To change the device press the p / q / t / u (arrow) buttons to select the Devices button on the screen, and then press the OK button.

  • Page 145: Viewing Movie Files

    Advanced features Using the Cloud Portal Service features Viewing movie files Basic Playback Select a file, see “To select a file in the list of contents” on page 143. Press the OK button or PLAY button to begin playback. NOTE Depending on the file size, it may take some time to start playback. Press the STOP button to stop playback. The screen returns to the list.
  • Page 146 Advanced features Using the Cloud Portal Service features To locate a specific file Press the Skip Reverse or Skip Forward button repeatedly to ❖ access the desired file. ( Z ): Playback starts from the beginning of the current file or ❖ previous file. ( z ): To locate subsequent files. ❖ To play in fast reverse or fast forward directions Press the CC or cc button during playback.
  • Page 147 Advanced features Using the Cloud Portal Service features To display the file status information Press the INFO button during playback. The information will be displayed at the bottom of the screen. Press the INFO button again to hide the information. NOTE The information may not correctly display depending on the content or media server.
  • Page 148 Advanced features Using the Cloud Portal Service features device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ® ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies.
  • Page 149 Advanced features Using the Cloud Portal Service features NOTE Depending on the content data will not be operated. ❖ The playback speed ( CC / cc ) may not change depending on the ❖ stream. Using Multi Title and Alternative Timelines Multi Title ®...

  • Page 150: Playing Music Files

    Advanced features Using the Cloud Portal Service features NOTE It may not be possible to use certain playback or display some files. In some cases certain files and servers may not support playback features, such as pause. Playing music files Basic Playback Select a file, see “To select a file in the list of contents” on page 143.
  • Page 151 Advanced features Using the Cloud Portal Service features To set the repeat mode Press the QUICK button. Press the p / q (arrow) buttons to select the Repeat. The current repeat setting appears. Press the u (arrow) button. Press the p / q (arrow) buttons to select Off, All, or 1. Press the BACK button.

  • Page 152: Viewing Photo Files

    Advanced features Using the Cloud Portal Service features File specifications: USB device use: File format: MP3, MP4 (AAC), WMA7/8/9, WAV(LPCM) ❖ Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz ❖ Bit rate: From 32 to 320 kbps ❖ Maximum number of files: 1000 per folder ❖...
  • Page 153 Advanced features Using the Cloud Portal Service features Single View mode In this view mode, only files located in the selected directory are displayed. When moving from Multi View mode to Single View mode, the currently selected photo appears. On Multi view mode, press the p / q / t / u (arrow) buttons to select a file, and then press the OK button.
  • Page 154 Advanced features Using the Cloud Portal Service features The music file in the same folder as the displayed photo will start playing. NOTE When the music file repeat mode is set to All, all the music files in the ❖ same folder as the photo will be played repeatedly. To stop music file playback, select Off in Background Music. ❖...

  • Page 155: Search

    Advanced features Using the Cloud Portal Service features Content on a connected Media: Data compatibility: JPEG Exif ver 2.2 ❖ File format: JPEG ❖ Maximum photo resolution: 4096 x 4096 ❖ Maximum number of files: 1000 per folder. ❖ Search To search for content, Select the search.

  • Page 156: Network Device Setup

    Advanced features Using the Cloud Portal Service features Network Device Setup In order to set the access the External Control Setup, Media Renderer Setup, or Device Name Setup, you must use the Network Device Setup menu. External Control Setup Press the MENU button. Select Network >...

  • Page 157: Setting Up The Media Renderer Feature

    Advanced features Using the Cloud Portal Service features Setting up the Media Renderer feature The TV can be configured as a Media Renderer. When operating as a Media Renderer, the TV displays content provided by mobile devices or PCs. The selection of the media is done by the media controller. The TV can play photo, movie, or audio files when operating as a Media Renderer. Press the MENU button.

  • Page 158: Chapter 9: Cloud Portal Companion Apps

    Cloud Portal Companion Apps Using Apps on a Tablet or Smart phone Toshiba provides apps for tablets and smart phones. The Companion apps allow you to connect to your favorite content with apps, on-line content, or your home network. NOTE Apps will vary by country and availability may change in the future with respect to current apps.

  • Page 159: Apps Control Profile

    Apps Collaboration Apps Control Profile compatible with this product. In order to experience the full suggested capabilities of this product, fully-compatible devices may be required. Apps can only be used when your TV and your tablet or smart phone ❖ are connected to the Internet. Some app features may require the TV and smart phone/tablet to be on ❖...

  • Page 160: Pairing

    Apps Collaboration Pairing pairing must be carried out again. To enable the New Device Detection: Press the MENU button. Select Network > Network Device Setup > External Control Setup and press the OK button. Press the p / q (arrow) buttons to select and set Apps Control Profile and press the OK button.

  • Page 161: Chapter 10: Troubleshooting

    Troubleshooting General troubleshooting Before calling a service technician, review this chapter or visit the Toshiba Technical Support Website at "support.toshiba.com" for possible causes/solutions for the problem you are experiencing. Before you begin to troubleshoot any problem, first unplug the TV from the AC wall outlet, wait approximately one minute, and then plug the TV back into the AC wall outlet.

  • Page 162: Picture Problems

    Troubleshooting Picture problems Other problems. If your TV’s problem is not addressed in this Troubleshooting chapter or the recommended solution has not worked, use the Reset Factory Defaults procedure, see “Resetting to Factory Defaults” on page TV will not turn on. Check the AC wall outlet by trying another device in the AC wall outlet.
  • Page 163 Troubleshooting Picture problems ensure that the Input Lock is set to Off, see “Locking video inputs” on page Poor display color or no color. Check for proper hookup connections between your devices. The station may be having broadcast difficulties. Try another channel. Adjust the Tint and/or Color, see “ColorMaster™” on page 103.

  • Page 164: Sound Problems

    Troubleshooting Sound problems Sound problems Check the antenna/cable connections, see “Connecting a digital audio system” on page The station may be having broadcast difficulties. Try another channel. The sound may be muted. Press the VOL (+ -) buttons or MUTE button. If you are connected to a computer using either the PC IN terminal or ®...

  • Page 165: Closed Caption Problems

    The V-Chip feature is available for U.S. V-Chip systems only, see “Using parental controls” on page ® HDMI CEC Control operation ® ® HDMI CEC Control feature is available for Toshiba HDMI compatible devices. ® HDMI cables. ® Ensure that HDMI cables with the ( ) Logo are used.

  • Page 166: Hdmi ® Problems

    Troubleshooting ® HDMI problems ® HDMI problems ® HDMI cables. ® Ensure that HDMI cables with the ( ) Logo are used, see ® ® “Connecting an HDMI device” on page Network problems Cannot connect to the Internet. Check the modem and its incoming cable/telephone connections, see “Connecting to a home network”...
  • Page 167 Troubleshooting Network problems computer. Example of proper setup: The computer has the IP address ❖ 192.168.0.100 with the Subnet mask 255.255.255.0, the TV has the IP address 192.168.0.101 with the Subnet mask 255.255.255.0; both are on the same subnet. Example of improper setup: The computer has the IP address ❖...

  • Page 168: Wireless Network Problems

    Troubleshooting Wireless network problems Wireless network problems Check that the router/AP (Access point) power is On. After starting wireless network setup, confirm that the network is configured properly by performing the network connection test, see “Network Connection Test” on page 124. Check the router/AP’s connection status. If the router/AP does not support Wi-Fi Protected Setup, Easy Setup (PBC) will not work even if the push-button is pressed, see “Wireless Setup”...

  • Page 169: Cloud Portal

    The TV is On and operating properly. ❖ Red: The power is in Standby. ❖ No Light: The power is Off. ❖ If the problem persists after trying the solutions In the U.S., visit Toshiba Customer Support Center on the web at "support.toshiba.com".

  • Page 170: Appendix A: Specifications

    Appendix A Specifications NOTE This model complies with the specifications listed below. ❖ Designs and specifications are subject to change without notice. ❖ This model may not be compatible with features and/or specifications ❖ that may be added in the future. Television system NTSC standard ATSC standard...

  • Page 171: Power Consumption

    Specifications Power consumption Power consumption 55L7400U 2.1 A (maximum current) 0.5 W in Standby mode Audio power 55L7400U 15 W + 15 W Speaker type 55L7400U 1 2/11 inch (3 cm) x 3 7/9 inch (9.6 cm) x 2 pcs...

  • Page 172: Wireless Connection

    WPA2, mixed mode WPA2/WPA, WEP, open Ethernet IEEE 802.3. Universal Serial Bus Specification, Revison 1.1. Universal Serial Bus Specification, Revison 2.0. Dimensions with table stand Width 48.87” (1248 mm) 55L7400U Height 29.94” (758 mm) Depth 7.48” (190 mm) Weight (mass) with stand 55L7400U 36.2 lbs (16.4 kg) Operating conditions Temperature 32º...

  • Page 173: Acceptable Signal Formats For Pc In, And Hdmi

    Specifications ® Acceptable signal formats for PC IN, and HDMI ® Acceptable signal formats for PC IN, and HDMI PC IN signal formats NOTE The PC IN on this TV only accepts signal formats which are compliant ❖ with VESA-DMT as in the table below. Since some PCs input signals are different from the resolution and frequency described in the table below, the following problems may occur: incorrect display, false format detection, picture position failure, blur, or judder.

  • Page 174: Hdmi ® Signal Formats

    Specifications ® Acceptable signal formats for PC IN, and HDMI ® HDMI signal formats NOTE ® The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA-DMT as in the table ®...

  • Page 175: Operating The Tv With Combination Buttons

    Specifications ® Acceptable signal formats for PC IN, and HDMI Operating the TV with combination buttons You can directly operate the TV power, input, picture size, and picture mode by pressing a combination button while holding down a color button. Button Color Combination Button Behavior/Mode...
  • Page 176 Appendix B External Keyboard Layout How to enter French or Spanish characters using the external ❖ keyboard. The external keyboard must be purchased separately. ❖ For how to use the external keyboard, refer to the User's Guide ❖ that comes with the keyboard. Setting the keyboard layout Before entering French or Spanish characters, configure the following setting on the TV:...
  • Page 177 Printing Simultaneous Key normal Shift Right Alt(Alt Gr) Shift + Right Alt a and A a or A á or Á b and B b or B c and C c or C © ¢ d and D d or D Ð...
  • Page 178 Printing Simultaneous Key normal Shift Right Alt(Alt Gr) Shift + Right Alt ] and } » ” \backslash and | ¬ ; and : ¶ ° ‘ and “ ´ ¨ Grave Accent(`) and Tilde(~) , and < < ç or Ç .

  • Page 179: International Key Table

    International Key table To enter special characters, follow the table below: Diacritic press first press second (Dead key) Space Acute ' or ´ É é Á á Ó ó Ú ú Ý ý Í í Ź ź Ŕ ŕ Grave È...
  • Page 180 Index ™ Numerics TruDialog ™ TruVolume 4:3 stretch Auto Aspect using 98 using 97 advanced picture settings cables Ambient Light Sensor 103 analog RGB (15-pin) 27 Base Color Adjustment 103 coaxial (F-type) 25 ™ ClearScan component video (red/green/blue) Color Temperature 104 ColorMaster™...
  • Page 181 Index manual tuning 66 control other devices ® next programmed channel 69 HDMI -CEC Control 36 skipping 66 control panel skipping video inputs 67 lock 79 specific channel 69 controlling other devices storing in memory 65 TV remote 36 closed captions Analog CC mode 71 expert picture settings button 73 RGB Filter 105...
  • Page 182 Index icon parental controls safety 18 blocking programs/movies by IR Blaster Out terminal rating (V-Chip) 75 using 31 using 75 IR Blaster setup 56 picture adjusting 98 adjusting quality 99 Media Renderer picture mode device name setup 157 selecting 98 setup 156 picture size MediaShare (Media Player)
  • Page 183 97 turn on TV 86 SmartTV troubleshooting 161 using 135 channel tuning problems 164 ® Netflix closed caption problems 165 software keyboard contact Toshiba 169 using 125 ® HDMI software licenses ® HDMI CEC Control problems show 127 software upgrade...
  • Page 184 Index Video video input locking 79 selecting 70 web browser 138 access web page 138 adding favorites 140 browsing favorites 139...

Table of Contents