Table of Contents
Advertisement
94
Basic features
Locking specific channels
❖
❖
❖
™
HDMI
CEC Control input source selection
If an HDMI
amplifier) is connected to the HDMI
™
HDMI
CEC device that is connected to the master HDMI
Use the INPUT button on the remote control or the control panel, see
"Learning about the remote control" on page
Adjusting the amplifier's audio
Using the TV's remote control, you can adjust or mute the sound volume
of your audio system.
The VOL (+ -) buttons adjust the volume level.
❖
The MUTE button turns off the sound.
❖
1
Press the SETUP button.
2
Select Options > HDMI CEC Control Setup and press the OK
button.
3
Press the p / q (arrow) buttons to select Initial Speaker Setting
and press the OK button.
4
Press the p / q (arrow) buttons to select Amplifier.
NOTE
Confirm that a connected HDMI
selected for the Amplifier input source.
NOTE
❖
❖
™
Other HDMI
CEC Control functions
When Enable HDMI CEC Control and all items in the HDMI
Control Setup menu are set to On, the following functions will be
enabled:
™
A non-HDMI
input is selected
The Enable HDMI CEC Control item is set to Off
The connected HDMI
tuner device
™
CEC device with HDMI
You can also use this function when the audio system is connected to
the TV's DIGITAL AUDIO OUT terminal (not HDMI
Select a digital audio input mode on the amplifier.
These functions depend on the device connected.
Get other manuals https://www.bkmanuals.com
™
CEC device is not a playback, recording or
™
switching capability (e.g. an
™
input, you can select another
53.
™
CEC device (such as DVD player, etc.) is
™
device.
™
connection).
™
CEC
Advertisement
Table of Contents
